Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the las...
Description: Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the...More Details »
Item #: DMPS-7822
Condition: New
Price: $16.99
Mopar Rear Bumper with Bumperettes 1968-1970 Dodge ChargerNew
All bumpers are made from heavy gauge steel with a bright chrome finish. Comes with a 5 year limited warranty against rust through.
Uses 8 bumper bolts.
Description: All bumpers are made from heavy gauge steel with a bright chrome finish. Comes with a 5 year limited warranty against rust through.
Uses 8 bumper bolts.
Item #: AMDS-10889
Condition: New
Oversize Handling Fee $19.99
Price: $499.99
Mopar Rear Channel Seals -1966-1970 B-bodyNew
These are the rubber seals that go inside the rear metal channel of the front doors. This part is usually responsible for your windows rattling. Sold as a pair and includes the mounting rivets
Description: These are the rubber seals that go inside the rear metal channel of the front doors. This part is usually responsible for your windows rattling. Sold as a pair and includes the mounting rivets
Item #: DMPS-3536
Condition: New
Price: $44.99
Mopar Steering Column Collar-1968-1969 A & B-body New
Mopar Steering Column Collar This collar is used to convert a column steering shift column to a floor shift column
Description: Replace your missing or worn out sun visors with a brand new set made in the correct color and vinyl grain for your car. Sold in pairs.
Item #: DMPS-3149
Condition: New
Price: $149.99
1960-1969 Battery Hold Down J-bolt SetNew
1960-1969 Battery Hold Down J-Bolt Set. Short J-bolt must be shortened 1" for 1966 and earlier A-Body applications.
Zinc phosphate J-bolts with CORRECT heavy gauge wing nuts and 1/4" flat washers.
Description: 1960-1969 Battery Hold Down J-Bolt Set. Short J-bolt must be shortened 1" for 1966 and earlier A-Body applications.
Zinc phosphate J-bolts with CORRECT heavy gauge wing nuts and 1/4" flat washers.
1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 1 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct d...
Description: 1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 1 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct dark color bolt and nut as original.
1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 3 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct d...
Description: 1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 3 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct dark color bolt and nut as original.
Item #: DMPS-HU1005
Condition: New
Price: $259.99
1967-1969 B-body Gearshift Control AssemblyNew
An excellent reproduction of the gearshift control assembly used on console shifted 1967-69 B-Body cars with automatic transmission. The assembly includes the gearshift control torque shaft, the u...
Description: An excellent reproduction of the gearshift control assembly used on console shifted 1967-69 B-Body cars with automatic transmission. The assembly includes the gearshift control torque shaft, the...More Details »
Item #: DMPS-80814
Condition: New
Price: $179.99
1968 Charger Padded Door Uppers Complete SetNew
1968 Charger Padded Door Uppers Complete SetPriced per pair. Manufactured by Legendary Perfect Front to Rear Alignment Stamped Metal Parts with Correct Door Panel Clip Hole Placement Solid ...
Item #: DMPS-8361-DO68CXU(C)SETDante's Mopar Parts
Description: 1968 Charger Padded Door Uppers Complete SetPriced per pair. Manufactured by Legendary Perfect Front to Rear Alignment Stamped Metal Parts with Correct Door Panel Clip Hole Placement Solid...More Details »
Item #: DMPS-8361-DO68CXU(C)SET
Condition: New
Does not qualify for Free Shipping. Handling Fee $9.99
Price: $1,299.99
1968 Charger Padded Door Uppers Front PanelsNew
1968 Charger Padded Door Uppers Front PanelsPriced per pair. Manufactured by Legendary Perfect Front to Rear Alignment Stamped Metal Parts with Correct Door Panel Clip Hole Placement Solid ...
Item #: DMPS-8368-DO68CXU0010(C)Dante's Mopar Parts
Description: 1968 Charger Padded Door Uppers Front PanelsPriced per pair. Manufactured by Legendary Perfect Front to Rear Alignment Stamped Metal Parts with Correct Door Panel Clip Hole Placement Solid...More Details »
Item #: DMPS-8368-DO68CXU0010(C)
Condition: New
Does not qualify for Free Shipping. Handling Fee $9.99
Price: $594.99
1968 Charger Padded Door Uppers RearsNew
1968 Charger Padded Door Uppers Rear PanelsPriced per pair. Manufactured by Legendary Perfect Front to Rear Alignment Stamped Metal Parts with Correct Door Panel Clip Hole Placement Solid V...
Item #: DMPS-8370-DO68CXU0040(C)Dante's Mopar Parts
Description: 1968 Charger Padded Door Uppers Rear PanelsPriced per pair. Manufactured by Legendary Perfect Front to Rear Alignment Stamped Metal Parts with Correct Door Panel Clip Hole Placement Solid...More Details »
Item #: DMPS-8370-DO68CXU0040(C)
Condition: New
Does not qualify for Free Shipping. Handling Fee $9.99
Price: $533.99
1968 Charger RT & Charger Bucket Style Door PanelNew
1968 Charger RT & Charger Bucket Style Front Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl with map pocket. Special cutout area in fil...
Item #: LAIS-8358-DO68CX00010(C)Legendary Auto Interiors
Description: 1968 Charger RT & Charger Bucket Style Front Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl with map pocket. Special cutout area in...More Details »
Item #: LAIS-8358-DO68CX00010(C)
Condition: New
Price: $516.99
1968 Charger RT & Charger Bucket Style Rear Door PanelNew
1968 Charger RT & Charger Bucket Style Rear Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl with map pocket. Special cutout area in fill...
Item #: LAIS-8360-DO68CX00040(C)Legendary Auto Interiors
1968-1970 B-body Dash Vent Cable- Passenger (Right) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the origina...
Description: 1968-1970 B-body Dash Vent Cable- Passenger (Right) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the...More Details »
Item #: DMPS-5978-FP309
Condition: New
Price: $69.99
1968-1970 B-body Heater/Defrost Control CableNew
FPCA316EN 1968-1970 B-body Heater/Defrost Control Cable Reproduction heater/defrost control cable for 1968-70 Mopar B-body models without air conditioning. Cable measures 42.5" Made in the USA A...
Description: FPCA316EN 1968-1970 B-body Heater/Defrost Control Cable Reproduction heater/defrost control cable for 1968-70 Mopar B-body models without air conditioning. Cable measures 42.5" Made in the USA...More Details »
Item #: DMPS-5988-FPCA316EN
Condition: New
Price: $39.99
1968-1970 B-body Road Runner GTX Charger Coronet Temperature Control CableNew
1968-1970 B-body Temperature Control Cable Reproduction cable for 1968-70 Mopar B-body models that connects the control levers to the control valve. Made in the USA Authentic Mopar Restoration P...
Description: 1968-1970 B-body Temperature Control Cable Reproduction cable for 1968-70 Mopar B-body models that connects the control levers to the control valve. Made in the USA Authentic Mopar Restoration...More Details »
Item #: DMPS-5990-FPCA317EN
Condition: New
Price: $34.99
1968-1970 B-body Vent Cable- Left HandNew
1968-1970 B-body Dash Vent Cable- Drivers (Left) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the original e...
Description: 1968-1970 B-body Dash Vent Cable- Drivers (Left) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the original...More Details »
Item #: DMPS-5973
Condition: New
Price: $69.99
1968-1970 B-Body Vent Window Frame KitNew
Correct set of reproduction vent frames finished in bright chrome for all 2 door cars, does not fit convertibles. Complete set includes the forward vent window posts, lower window frames, and uppe...
Description: Correct set of reproduction vent frames finished in bright chrome for all 2 door cars, does not fit convertibles. Complete set includes the forward vent window posts, lower window frames, and...More Details »
Item #: DMPS-11224-6870BVWKIT
Condition: New
Price: $599.99
1968-1970 B-Body, 1967-1970 A-body Exterior Door Handles with Black ButtonNew
Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits: 1968,1969,...
Description: Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits:...More Details »
Item #: DMPS-11230
Condition: New
Price: $119.99
Sale: $99.99
Save: 17%
Save: $20.00
1968-1970 B-Body, 1967-1970 A-body, 1965-1968 C-body Exterior Door HandlesNew
Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits: 1968,1969,1970 Do...
Description: Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits: 1968,1969,1970...More Details »
Item #: DMPS-5946-MP5230
Condition: New
Price: $99.99
1968-1970 Dodge Charger Door Belt Molding ClipsNew
Replacement clip kit used to secure the top of door belt moldings on all 1968-1970 Dodge Charger. This kit does both doors, see other listing for the quarter panel belt molding clips.
Description: Replacement clip kit used to secure the top of door belt moldings on all 1968-1970 Dodge Charger. This kit does both doors, see other listing for the quarter panel belt molding clips.
Item #: DMPS-3129
Condition: New
Price: $89.99
1968-1970 Dodge Charger Quarter Panel Top Belt Molding ClipsNew
Replacement clip kit used to secure the top of the quarter panel belt moldings on all 1968-1970 Dodge Charger. This kit does both sides, see other listing for the door belt molding clips.
Description: Replacement clip kit used to secure the top of the quarter panel belt moldings on all 1968-1970 Dodge Charger. This kit does both sides, see other listing for the door belt molding clips.
Item #: DMPS-3130
Condition: New
Price: $49.99
1968-69 Bucket Seat Foam Set A & B -Body Dart Barracuda GTX Charger Road RunnerNew
Chrysler, Dodge, Plymouth 1968-69 Bucket Seat Foam Set A & B -Body 1968-69 molded foam for all A & B -Body models with bucket seats. Sets consist of a pair of (2) front seat tops and (2) f...
Description: Chrysler, Dodge, Plymouth 1968-69 Bucket Seat Foam Set A & B -Body 1968-69 molded foam for all A & B -Body models with bucket seats. Sets consist of a pair of (2) front seat tops and (2)...More Details »
Item #: DMPS-5627-MF68ABSET
Condition: New
Oversized shipping fee $14.99
Price: $339.99
1968-70 Dodge Charger Rear Spoiler Under Decklid BracketsNew
Perfect stamped steel reproductions of the brackets used to distribute the weight and force of the wing style spoilers to the underside panel of the deck lid on 1968-1970 Dodge Charger Supplied po...
Description: Perfect stamped steel reproductions of the brackets used to distribute the weight and force of the wing style spoilers to the underside panel of the deck lid on 1968-1970 Dodge Charger Supplied...More Details »
Item #: DMPS-4639-FP215
Condition: New
Price: $59.99
Cat Whiskers Top Cat Correct Side Window Sweep Kits 1968-1970 Dodge ChargerNew
Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Made in the USA
Description: Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Made in the USA
Item #: DMPS-7312
Condition: New
Price: $169.99
Firewall Gasket KitsNew
Our firewall gasket kits include gaskets for the following: steering column master cylinder accelerator pedal heater blower motor and heater tubes wiper pivot seals
Description: Our firewall gasket kits include gaskets for the following: steering column master cylinder accelerator pedal heater blower motor and heater tubes wiper pivot seals
Description: A complete paint gasket kit is an essential item to have when doing a complete body restoration. Die-cut for a precise fit and Made in the USA
Heater Hose Bracket 1966-1968 Hemi B-body and 1963-1966 A-body Bolts to right inner fender panel above shock tower. Includes correct hex head mounting screw.
Made from correct gauge steel and ...
Description: Heater Hose Bracket 1966-1968 Hemi B-body and 1963-1966 A-body Bolts to right inner fender panel above shock tower. Includes correct hex head mounting screw.
Made from correct gauge steel and cadmium plated as original.
Item #: DMPS-1015
Condition: New
Price: $14.99
Heater Hose Kits- A/B/E-bodyNew
Heater Hose Kits Our kits includes the grooved & marked hoses stamped with the original part numbers. Includes the spring clamps and a pair of heater hose straps. Air cars have extra length ...
Description: Heater Hose Kits Our kits includes the grooved & marked hoses stamped with the original part numbers. Includes the spring clamps and a pair of heater hose straps. Air cars have extra length...More Details »
Item #: DMPS-8642-HH
Condition: New
Price: $79.99
Hose Clamp Kit-1966-1969 Hemi & Big BlockNew
Hose Clamp Kit Our kits includes the correct style and color spring clamps for the heater hoses and radiator hoses. Available for non-air conditioning cars only.
Description: Hose Clamp Kit Our kits includes the correct style and color spring clamps for the heater hoses and radiator hoses. Available for non-air conditioning cars only.
Item #: DMPS-HCK1
Condition: New
Price: $14.99
Hose Clamp Kit-1966-1969 Small BlockNew
Hose Clamp Kit Our kits includes the correct style and color spring clamps for the heater hoses and radiator hoses. Available for non-air conditioning cars only.
Description: Hose Clamp Kit Our kits includes the correct style and color spring clamps for the heater hoses and radiator hoses. Available for non-air conditioning cars only.
Item #: DMPS-HCK5
Condition: New
Price: $16.99
License Plate Frame-1968 Dodge ChargerNew
Mopar License Plate Frame Show the world what kind of car you are driving with our custom zinc plated license plate frame.Designed with top mounting holes and triple chrome plated for rust preven...
Description: Mopar License Plate Frame Show the world what kind of car you are driving with our custom zinc plated license plate frame.Designed with top mounting holes and triple chrome plated for rust...More Details »
Item #: DMPS-10148-120568
Condition: New
Not Available
Price: $19.99
Mopar Anco Bayonet Style Wiper BladesNew
Reproduction "Anco style" wiper blades for various Mopar cars that use the bayonete style blades. Features a stainless steel blade with correct rubber insert. Designed after the "Anco" brand blade...
Description: Reproduction "Anco style" wiper blades for various Mopar cars that use the bayonete style blades. Features a stainless steel blade with correct rubber insert. Designed after the "Anco" brand...More Details »
1966-1974 A-Body, 1966-1970 B-body, 1966-1968 C-body Mopar Bulkhead Connector Plugs.
Set of the 3 plugs which are used for the engine, headlight and wiper.
Description: 1966-1974 A-Body, 1966-1970 B-body, 1966-1968 C-body Mopar Bulkhead Connector Plugs.
Set of the 3 plugs which are used for the engine, headlight and wiper.
Item #: DMPS-10225P
Condition: New
Price: $49.99
Mopar 10" Front or Rear Arm Rest Pads 1966-1970 B-body, 1966-1970 Dodge Charger (rear only), 1966-1970 C-body (rear only on 2 door cars)New
10"" Front or Rear Arm Pads Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Colored arm pads are molded in color, not painted. Fits: 1966,1967 Plymouth Sate...
Description: 10"" Front or Rear Arm Pads Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Colored arm pads are molded in color, not painted. Fits: 1966,1967 Plymouth...More Details »
Item #: DMPS-6518
Condition: New
Price: $79.99
Mopar 10" Front or Rear Arm Rest Pads w/ashtray hole1966-1970 B-body, 1966-1970 Dodge Charger (rear only), 1966-1970 C-body (rear only on 2 door cars)New
10"" Front or Rear Arm Pads with ashtray hole Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Available in black only. Fits: 1966,1967 Plymouth Satellite, B...
Description: 10"" Front or Rear Arm Pads with ashtray hole Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Available in black only. Fits: 1966,1967 Plymouth Satellite,...More Details »
Item #: DMPS-6519
Condition: New
Price: $119.99
Mopar 1964-1969 Small Block Engine Oil Dipstick & TubeNew
Our high quality reproduction oil indicator and tube for 1964-69 small block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct swedged fl...
Description: Our high quality reproduction oil indicator and tube for 1964-69 small block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct swedged...More Details »
Item #: DMPS-6470
Condition: New
Limited Supply: Only 0 Left!
Price: $49.99
Mopar 1964-1970 B-body Center Console LensNew
Mopar B-body Console Lens Reproduction plastic lens for the console lights Fits 4 speed or automatic consoles Sold as a pair. Fits: 1964,1965,1966,1967,1968,1969,1970 Plymouth Belvedere, Satel...
Description: Mopar B-body Console Lens Reproduction plastic lens for the console lights Fits 4 speed or automatic consoles Sold as a pair. Fits: 1964,1965,1966,1967,1968,1969,1970 Plymouth Belvedere,...More Details »
Item #: DMPS-6104
Condition: New
Price: $9.99
Mopar 1964-1971 426 Hemi Oil Indicator TubeNew
A high quality reproduction oil indicator tube for 1964-71 426 hemi applications. Formed from the correct wall thickness steel tubing with correct swedged flare & tapered end for ease of installat...
Description: A high quality reproduction oil indicator tube for 1964-71 426 hemi applications. Formed from the correct wall thickness steel tubing with correct swedged flare & tapered end for ease of...More Details »
A high quality reproduction oil indicator for 1966-69 426 hemi applications. Oil indicator handle is accurately formed and covered with hi-temp white insulator, includes anti-rattle bends, embosse...
Description: A high quality reproduction oil indicator for 1966-69 426 hemi applications. Oil indicator handle is accurately formed and covered with hi-temp white insulator, includes anti-rattle bends,...More Details »
Item #: DMPS-6241
Condition: New
Price: $42.99
Mopar 1966-1969 A & B-body Styles Battery Hold Down KitNew
1966-1969 battery hold down kit for A & B-body cars, includes the correct zinc phosphate J-bolts with CORRECT heavy gauge wing nuts, 1/4" flat washers, and a thermo-plastic coated cro...
Description: 1966-1969 battery hold down kit for A & B-body cars, includes the correct zinc phosphate J-bolts with CORRECT heavy gauge wing nuts, 1/4" flat washers, and a thermo-plastic coated...More Details »
Item #: DMPS-6643-BHD03
Condition: New
Price: $24.99
Mopar 1966-1969 B-body Big Block Oil Dipstick & TubeNew
High quality reproduction oil indicator and tube assembly for 1966-69 B-Body big block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct ...
Description: High quality reproduction oil indicator and tube assembly for 1966-69 B-Body big block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct...More Details »
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and mounting bolt for battery tray. (1) required per vehi...
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and mounting bolt for battery tray. (1) required per...More Details »
Description: Stainless steel jack hold down spring. Fits all 1966-1974 cars except 1966-1967 B-body.
Item #: DMPS-3031
Condition: New
Price: $11.99
Mopar 1967-1969 A/B Body Automatic Console Shifter AssemblyNew
Mopar Automatic Shifter Assembly. Correct for all automatic console cars. Replace your missing or broken shifter with one of our eproduction console shifter kits. They are made with an chrome fini...
Description: Mopar Automatic Shifter Assembly. Correct for all automatic console cars. Replace your missing or broken shifter with one of our eproduction console shifter kits. They are made with an chrome...More Details »
Item #: DMPS-3255
Condition: New
Price: $279.99
Mopar 1967-1969 A/B Body Automatic Console Shifter KnobNew
Mopar Automatic Shifter Knob. Correct for all automatic console cars. Replace your missing or broken shifter knob with one of our reproduction made with an chrome finish just like OE Fits: 1966-1...
Description: Mopar Automatic Shifter Knob. Correct for all automatic console cars. Replace your missing or broken shifter knob with one of our reproduction made with an chrome finish just like OE Fits: 1966-1969 A & B Body cars
Item #: DMPS-3258
Condition: New
Price: $79.99
Mopar 1967-1969 B-Body Battery Tray Brace SetNew
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Kits include correct J-nuts and mounting bolts. Fits:1967,1968,1969 Dodge Coro...
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Kits include correct J-nuts and mounting bolts. Fits:1967,1968,1969 Dodge...More Details »
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for battery tray. (2) required ...
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for battery tray. (2) required...More Details »
Snap on windlace covers the quarter jamb pinch weld from the end of the sill plate to the top of the jamb.
Sold as a pair.
Available in black or white and are easily painted if you have a colored...
Description: Snap on windlace covers the quarter jamb pinch weld from the end of the sill plate to the top of the jamb.
Sold as a pair.
Available in black or white and are easily painted if you have a colored interior.
Mopar 1967-70 B-body 4 Speed Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger, Coron...
Description: Mopar 1967-70 B-body 4 Speed Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger,...More Details »
Item #: DMPS-10241-CB4S
Condition: New
Oversized handling fee $9.99
Price: $339.99
Mopar 1967-70 B-body GTX Charger Road Runner Automatic Center ConsoleNew
Mopar 1967-70 B-body Automatic Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger, Cor...
Description: Mopar 1967-70 B-body Automatic Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger,...More Details »
Item #: DMPS-3267-CBA
Condition: New
Oversized handling fee $9.99
Price: $299.99
Mopar 1968 Charger Tail Light AssemblyNew
Priced per pair. Complete tail light assemblies including housing, bezels, tail light lenses and back up lenses.