Description: Mopar Door and Ignition Lockset Includes two matching keys. Fits all 1966-1968 cars.More Details »
Item #: DMPS-10004
Condition: New
Price: $39.99
Mopar Fuel Tanks Gas Tank 1968-1970 Dodge & Plymouth B-body (except Charger) New
Correct OE fuel tanks made with galvanized steel as original. Available with EEC (4 vent lines on front) or without (2 vent lines on front) Lock Ring Included.
Description: Correct OE fuel tanks made with galvanized steel as original. Available with EEC (4 vent lines on front) or without (2 vent lines on front) Lock Ring Included.
Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the las...
Description: Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the...More Details »
Item #: DMPS-7820
Condition: New
Price: $16.99
Mopar Rear Channel Seals -1966-1970 B-bodyNew
These are the rubber seals that go inside the rear metal channel of the front doors. This part is usually responsible for your windows rattling. Sold as a pair and includes the mounting rivets
Description: These are the rubber seals that go inside the rear metal channel of the front doors. This part is usually responsible for your windows rattling. Sold as a pair and includes the mounting rivets
Item #: DMPS-3536
Condition: New
Price: $44.99
Mopar Steering Column Collar-1968-1969 A & B-body New
Mopar Steering Column Collar This collar is used to convert a column steering shift column to a floor shift column
Description: These are the end plugs that go at the end of the outside door sweep which protects the chrome molding on the rear glass. Used on hardtop cars only.
Item #: DMPS-7400
Condition: New
Price: $19.99
1960-1969 Battery Hold Down J-bolt SetNew
1960-1969 Battery Hold Down J-Bolt Set. Short J-bolt must be shortened 1" for 1966 and earlier A-Body applications.
Zinc phosphate J-bolts with CORRECT heavy gauge wing nuts and 1/4" flat washers.
Description: 1960-1969 Battery Hold Down J-Bolt Set. Short J-bolt must be shortened 1" for 1966 and earlier A-Body applications.
Zinc phosphate J-bolts with CORRECT heavy gauge wing nuts and 1/4" flat washers.
1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 1 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct d...
Description: 1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 1 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct dark color bolt and nut as original.
1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 3 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct d...
Description: 1967-1968 B-body Positive Battery Cable for cars with a Hemi, Automatic Transmission and 3 prong Neutral Safety Switch.
Show quality reproduction with the correct terminals. Includes the correct dark color bolt and nut as original.
Item #: DMPS-HU1005
Condition: New
Price: $259.99
1967-1969 B-body Gearshift Control AssemblyNew
An excellent reproduction of the gearshift control assembly used on console shifted 1967-69 B-Body cars with automatic transmission. The assembly includes the gearshift control torque shaft, the u...
Description: An excellent reproduction of the gearshift control assembly used on console shifted 1967-69 B-Body cars with automatic transmission. The assembly includes the gearshift control torque shaft, the...More Details »
Item #: DMPS-80814
Condition: New
Price: $179.99
1968 Belvedere & Road Runner Deluxe & Standard Bench Style Rear Door PanelNew
1968 Belvedere & Roadrunner Deluxe & Standard Bench Style Rear Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl with Reed grain inser...
Item #: LAIS-8267-DO68CRWE080(C)Legendary Auto Interiors
Description: 1968 Belvedere & Roadrunner Deluxe & Standard Bench Style Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl with Reed grain insert....More Details »
Item #: LAIS-8265-DO68CRWE020(C)
Condition: New
Price: $463.99
1968 Satellite & Roadrunner "Decor" Bench Style Door PanelNew
1968 Satellite & Roadrunner Decor Bench Style Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl. Special cutout area in filler board to ac...
Item #: LAIS-8262-DO68CRP0020(C)Legendary Auto Interiors
Description: 1968 Satellite & Roadrunner Decor Bench Style Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl. Special cutout area in filler board to...More Details »
Item #: LAIS-8262-DO68CRP0020(C)
Condition: New
Price: $475.99
1968 Satellite & Roadrunner "Decor" Bench Style Rear Door PanelNew
1968 Satellite & Roadrunner Decor Bench Style Rear Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl. Special cutout area in filler board ...
Description: 1968 Satellite & Roadrunner Decor Bench Style Rear Door Panel This Legendary product features as-original Die-electrically heat sealed Cologne grain vinyl. Special cutout area in filler board...More Details »
1968-1970 B-body Dash Vent Cable- Passenger (Right) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the origina...
Description: 1968-1970 B-body Dash Vent Cable- Passenger (Right) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the...More Details »
Item #: DMPS-5978-FP309
Condition: New
Price: $69.99
1968-1970 B-body Heater/Defrost Control CableNew
FPCA316EN 1968-1970 B-body Heater/Defrost Control Cable Reproduction heater/defrost control cable for 1968-70 Mopar B-body models without air conditioning. Cable measures 42.5" Made in the USA A...
Description: FPCA316EN 1968-1970 B-body Heater/Defrost Control Cable Reproduction heater/defrost control cable for 1968-70 Mopar B-body models without air conditioning. Cable measures 42.5" Made in the USA...More Details »
Item #: DMPS-5988-FPCA316EN
Condition: New
Price: $39.99
1968-1970 B-body Road Runner GTX Charger Coronet Temperature Control CableNew
1968-1970 B-body Temperature Control Cable Reproduction cable for 1968-70 Mopar B-body models that connects the control levers to the control valve. Made in the USA Authentic Mopar Restoration P...
Description: 1968-1970 B-body Temperature Control Cable Reproduction cable for 1968-70 Mopar B-body models that connects the control levers to the control valve. Made in the USA Authentic Mopar Restoration...More Details »
Item #: DMPS-5990-FPCA317EN
Condition: New
Price: $34.99
1968-1970 B-body Vent Cable- Left HandNew
1968-1970 B-body Dash Vent Cable- Drivers (Left) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the original e...
Description: 1968-1970 B-body Dash Vent Cable- Drivers (Left) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the original...More Details »
Item #: DMPS-5973
Condition: New
Price: $69.99
1968-1970 B-Body Vent Window Frame KitNew
Correct set of reproduction vent frames finished in bright chrome for all 2 door cars, does not fit convertibles. Complete set includes the forward vent window posts, lower window frames, and uppe...
Description: Correct set of reproduction vent frames finished in bright chrome for all 2 door cars, does not fit convertibles. Complete set includes the forward vent window posts, lower window frames, and...More Details »
Item #: DMPS-11224-6870BVWKIT
Condition: New
Price: $599.99
1968-1970 B-Body, 1967-1970 A-body Exterior Door Handles with Black ButtonNew
Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits: 1968,1969,...
Description: Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits:...More Details »
Item #: DMPS-11230
Condition: New
Price: $119.99
Sale: $99.99
Save: 17%
Save: $20.00
1968-1970 B-Body, 1967-1970 A-body, 1965-1968 C-body Exterior Door HandlesNew
Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits: 1968,1969,1970 Do...
Description: Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits: 1968,1969,1970...More Details »
High quality reproduction manufactured to OE specification for an authentic appearance.
Set of 4 moldings
Made in the USA.
Does not fit 1969 GTX or 1969 Sport Satellite
Description: High quality reproduction manufactured to OE specification for an authentic appearance.
Set of 4 moldings
Made in the USA.
Does not fit 1969 GTX or 1969 Sport Satellite
Item #: DMPS-1480
Condition: New
Oversize Handling Fee $14.99
Price: $329.99
1968-69 Bucket Seat Foam Set A & B -Body Dart Barracuda GTX Charger Road RunnerNew
Chrysler, Dodge, Plymouth 1968-69 Bucket Seat Foam Set A & B -Body 1968-69 molded foam for all A & B -Body models with bucket seats. Sets consist of a pair of (2) front seat tops and (2) f...
Description: Chrysler, Dodge, Plymouth 1968-69 Bucket Seat Foam Set A & B -Body 1968-69 molded foam for all A & B -Body models with bucket seats. Sets consist of a pair of (2) front seat tops and (2)...More Details »
Item #: DMPS-5627-MF68ABSET
Condition: New
Oversized shipping fee $14.99
Price: $339.99
Cat Whiskers Top Cat Correct Side Window Sweep Kits 1968-1970 B-body 2 DOOR HARDTOPNew
Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Fits 2 door hardtop only. Made in the USA
Description: Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Fits 2 door hardtop only. Made in the USA
Item #: DMPS-7310
Condition: New
Price: $169.99
Cat Whiskers Top Cat Correct Side Window Sweep Kits 1968-1970 B-body POST CARNew
4 piece Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Made in the USA.
Fits 2 door POST cars only (pop out quarter windows)
Description: 4 piece Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Made in the USA.
Fits 2 door POST cars only (pop out quarter windows)
Item #: DMPS-7374
Condition: New
Price: $149.99
Cat Whiskers Top Cat Side Window Sweep Kits 1968-1970 B-body ConvertibleNew
Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Made in the USA
Set of 8 sweeps, inners & outers.
Description: Top Cat brand cat whiskers, Correct side window sweep kits with attention to detail and quality. Made in the USA
Set of 8 sweeps, inners & outers.
Item #: DMPS-7373
Condition: New
Price: $169.99
Firewall Gasket KitsNew
Our firewall gasket kits include gaskets for the following: steering column master cylinder accelerator pedal heater blower motor and heater tubes wiper pivot seals
Description: Our firewall gasket kits include gaskets for the following: steering column master cylinder accelerator pedal heater blower motor and heater tubes wiper pivot seals
Description: A complete paint gasket kit is an essential item to have when doing a complete body restoration. Die-cut for a precise fit and Made in the USA
Heater Hose Bracket 1966-1968 Hemi B-body and 1963-1966 A-body Bolts to right inner fender panel above shock tower. Includes correct hex head mounting screw.
Made from correct gauge steel and ...
Description: Heater Hose Bracket 1966-1968 Hemi B-body and 1963-1966 A-body Bolts to right inner fender panel above shock tower. Includes correct hex head mounting screw.
Made from correct gauge steel and cadmium plated as original.
Item #: DMPS-1015
Condition: New
Price: $14.99
Heater Hose Bracket- some 1967 & all 1968 Big Block non A/C New
Heater Hose Bracket Fits some 1967 & All 1968 Non-Air Condition Big Block Applications
Fastens into tabs on top of right valve cover.
Made from correct gauge steel and cadmium plated as ori...
Description: Heater Hose Bracket Fits some 1967 & All 1968 Non-Air Condition Big Block Applications
Fastens into tabs on top of right valve cover.
Made from correct gauge steel and cadmium plated as original.
Item #: DMPS-1013
Condition: New
Price: $12.99
Heater Hose Kits- A/B/E-bodyNew
Heater Hose Kits Our kits includes the grooved & marked hoses stamped with the original part numbers. Includes the spring clamps and a pair of heater hose straps. Air cars have extra length ...
Description: Heater Hose Kits Our kits includes the grooved & marked hoses stamped with the original part numbers. Includes the spring clamps and a pair of heater hose straps. Air cars have extra length...More Details »
Item #: DMPS-8642-HH
Condition: New
Price: $79.99
Hose Clamp Kit-1966-1969 Hemi & Big BlockNew
Hose Clamp Kit Our kits includes the correct style and color spring clamps for the heater hoses and radiator hoses. Available for non-air conditioning cars only.
Description: Hose Clamp Kit Our kits includes the correct style and color spring clamps for the heater hoses and radiator hoses. Available for non-air conditioning cars only.
Item #: DMPS-HCK1
Condition: New
Price: $14.99
License Plate Frame- Plymouth Road RunnerNew
Mopar License Plate Frame Show the world what kind of car you are driving with our custom zinc plated license plate frame.Designed with top mounting holes and triple chrome plated for rust preven...
Description: Mopar License Plate Frame Show the world what kind of car you are driving with our custom zinc plated license plate frame.Designed with top mounting holes and triple chrome plated for rust...More Details »
Item #: DMPS-10162-13216
Condition: New
Limited Supply: Only 0 Left!
Price: $19.99
Mopar "383" Hood Engine Call Out -1968 Plymouth Road RunnerNew
Excellent reproduction the "383" engine hood callout inserts. Sold as a pair and includes mounting hardware Fits: 1968 Plymouth GTX, Road Runner
Description: Excellent reproduction the "383" engine hood callout inserts. Sold as a pair and includes mounting hardware Fits: 1968 Plymouth GTX, Road Runner
Description: Excellent reproduction the "440" engine hood callout inserts. Sold as a pair and includes mounting hardware Fits: 1968 Plymouth GTX, Road Runner
1966-1974 A-Body, 1966-1970 B-body, 1966-1968 C-body Mopar Bulkhead Connector Plugs.
Set of the 3 plugs which are used for the engine, headlight and wiper.
Description: 1966-1974 A-Body, 1966-1970 B-body, 1966-1968 C-body Mopar Bulkhead Connector Plugs.
Set of the 3 plugs which are used for the engine, headlight and wiper.
Item #: DMPS-10225P
Condition: New
Price: $49.99
Mopar - 1968 Road Runner HornNew
1968 Plymouth Road Runner Horn Correct BLACK "beep beep" horn with the long style bracket. Fits: 1968 Plymouth Road Runner
Description: 1968 Plymouth Road Runner Horn Correct BLACK "beep beep" horn with the long style bracket. Fits: 1968 Plymouth Road Runner
Item #: DMPS-8864
Condition: New
Price: $79.99
Mopar 10" Front or Rear Arm Rest Pads 1966-1970 B-body, 1966-1970 Dodge Charger (rear only), 1966-1970 C-body (rear only on 2 door cars)New
10"" Front or Rear Arm Pads Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Colored arm pads are molded in color, not painted. Fits: 1966,1967 Plymouth Sate...
Description: 10"" Front or Rear Arm Pads Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Colored arm pads are molded in color, not painted. Fits: 1966,1967 Plymouth...More Details »
Item #: DMPS-6518
Condition: New
Price: $79.99
Mopar 10" Front or Rear Arm Rest Pads w/ashtray hole1966-1970 B-body, 1966-1970 Dodge Charger (rear only), 1966-1970 C-body (rear only on 2 door cars)New
10"" Front or Rear Arm Pads with ashtray hole Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Available in black only. Fits: 1966,1967 Plymouth Satellite, B...
Description: 10"" Front or Rear Arm Pads with ashtray hole Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Available in black only. Fits: 1966,1967 Plymouth Satellite,...More Details »
Item #: DMPS-6519
Condition: New
Price: $119.99
Mopar 1964-1969 Small Block Engine Oil Dipstick & TubeNew
Our high quality reproduction oil indicator and tube for 1964-69 small block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct swedged fl...
Description: Our high quality reproduction oil indicator and tube for 1964-69 small block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct swedged...More Details »
Item #: DMPS-6470
Condition: New
Limited Supply: Only 0 Left!
Price: $49.99
Mopar 1964-1970 B-body Center Console LensNew
Mopar B-body Console Lens Reproduction plastic lens for the console lights Fits 4 speed or automatic consoles Sold as a pair. Fits: 1964,1965,1966,1967,1968,1969,1970 Plymouth Belvedere, Satel...
Description: Mopar B-body Console Lens Reproduction plastic lens for the console lights Fits 4 speed or automatic consoles Sold as a pair. Fits: 1964,1965,1966,1967,1968,1969,1970 Plymouth Belvedere,...More Details »
Item #: DMPS-6104
Condition: New
Price: $9.99
Mopar 1964-1971 426 Hemi Oil Indicator TubeNew
A high quality reproduction oil indicator tube for 1964-71 426 hemi applications. Formed from the correct wall thickness steel tubing with correct swedged flare & tapered end for ease of installat...
Description: A high quality reproduction oil indicator tube for 1964-71 426 hemi applications. Formed from the correct wall thickness steel tubing with correct swedged flare & tapered end for ease of...More Details »
A high quality reproduction oil indicator for 1966-69 426 hemi applications. Oil indicator handle is accurately formed and covered with hi-temp white insulator, includes anti-rattle bends, embosse...
Description: A high quality reproduction oil indicator for 1966-69 426 hemi applications. Oil indicator handle is accurately formed and covered with hi-temp white insulator, includes anti-rattle bends,...More Details »
Item #: DMPS-6241
Condition: New
Price: $42.99
Mopar 1966-1969 A & B-body Styles Battery Hold Down KitNew
1966-1969 battery hold down kit for A & B-body cars, includes the correct zinc phosphate J-bolts with CORRECT heavy gauge wing nuts, 1/4" flat washers, and a thermo-plastic coated cro...
Description: 1966-1969 battery hold down kit for A & B-body cars, includes the correct zinc phosphate J-bolts with CORRECT heavy gauge wing nuts, 1/4" flat washers, and a thermo-plastic coated...More Details »
Item #: DMPS-6643-BHD03
Condition: New
Price: $24.99
Mopar 1966-1969 B-body Big Block Oil Dipstick & TubeNew
High quality reproduction oil indicator and tube assembly for 1966-69 B-Body big block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct ...
Description: High quality reproduction oil indicator and tube assembly for 1966-69 B-Body big block applications. The clear zinc plated tube is formed from the correct wall thickness steel tubing with correct...More Details »
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and mounting bolt for battery tray. (1) required per vehi...
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and mounting bolt for battery tray. (1) required per...More Details »
Description: Stainless steel jack hold down spring. Fits all 1966-1974 cars except 1966-1967 B-body.
Item #: DMPS-3031
Condition: New
Price: $11.99
Mopar 1967-1969 B-Body Battery Tray Brace SetNew
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Kits include correct J-nuts and mounting bolts. Fits:1967,1968,1969 Dodge Coro...
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Kits include correct J-nuts and mounting bolts. Fits:1967,1968,1969 Dodge...More Details »
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for battery tray. (2) required ...
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for battery tray. (2) required...More Details »
Snap on windlace covers the quarter jamb pinch weld from the end of the sill plate to the top of the jamb.
Sold as a pair.
Available in black or white and are easily painted if you have a colored...
Description: Snap on windlace covers the quarter jamb pinch weld from the end of the sill plate to the top of the jamb.
Sold as a pair.
Available in black or white and are easily painted if you have a colored interior.
Mopar 1967-70 B-body 4 Speed Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger, Coron...
Description: Mopar 1967-70 B-body 4 Speed Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger,...More Details »
Item #: DMPS-10241-CB4S
Condition: New
Oversized handling fee $9.99
Price: $339.99
Mopar 1967-70 B-body GTX Charger Road Runner Automatic Center ConsoleNew
Mopar 1967-70 B-body Automatic Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger, Cor...
Description: Mopar 1967-70 B-body Automatic Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger,...More Details »
Item #: DMPS-3267-CBA
Condition: New
Oversized handling fee $9.99
Price: $299.99
Mopar 1968 Plymouth Road Runner GTX LED Tail Light KitNew
Fully sequential LED kit, utilizes advanced technology by lighting LED’s in a fluid and sweeping pattern, rather than merely lighting up blocks of LEDs.
Choose standard operations or our fully ...
Description: Fully sequential LED kit, utilizes advanced technology by lighting LED’s in a fluid and sweeping pattern, rather than merely lighting up blocks of LEDs.
Choose standard operations or our fully...More Details »
Item #: DMPS-1200568
Condition: New
Product is made to
order. Allow 3-4
weeks for shipping
MADE TO ORDER ALLOW 10-12 WEEKS FOR SHIPPING
Price: $189.99
Mopar 1968-1969 A/B-Body Bucket Seat Back Clip SetNew
Mopar Bucket Seat Back Clips For use with out die-cut 1968-1969 A/B-body bucket seat back boards which are sold separately One set does one bucket seat. See picture of what it looks like...
Description: Mopar Bucket Seat Back Clips For use with out die-cut 1968-1969 A/B-body bucket seat back boards which are sold separately One set does one bucket seat. See picture of what it looks like...More Details »
Item #: DMPS-7680-TPSBCLIP
Condition: New
Price: $39.99
Mopar 1968-1970 B-body Bumper Jack RetainerNew
An excellent reproduction of the often missing 1968-70 B-Body bumper jack bar retainer. Not used on convertibles or Charger models. Formed from correct gauge steel then powder coated low gloss blac...
Description: An excellent reproduction of the often missing 1968-70 B-Body bumper jack bar retainer. Not used on convertibles or Charger models. Formed from correct gauge steel then powder coated low gloss...More Details »