Description: 1970 Plymouth B-body (except Superbird) headlight harness. Our headlight harnesses feature the correct color wires, factory connectors and install the same way as the original.
Description: Mopar Black Steering Wheel 1967-1969 A/B/C-Body Replace your broken or cracked steering wheel with this accurate reproduction made look and fit just like OE Comes in Black only. Steering Wheel...More Details »
Description: Reproduction of the "070" 1970-71 fan clutch used on all Big Block, Hemi and 1970 340 cars without air conditioning.
Same part as our DMPS-3164, except the face is not concourse appearing....More Details »
Description: Correct OE fuel tanks made with galvanized steel as original. Available with EEC (4 vent lines on front) or without (2 vent lines on front) Lock Ring Included.
Description: Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the...More Details »
Description: These are the rubber seals that go inside the rear metal channel of the front doors. This part is usually responsible for your windows rattling. Sold as a pair and includes the mounting rivets
Description: 1968-1970 B-body Dash Vent Cable- Passenger (Right) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the...More Details »
Description: FPCA316EN 1968-1970 B-body Heater/Defrost Control Cable Reproduction heater/defrost control cable for 1968-70 Mopar B-body models without air conditioning. Cable measures 42.5" Made in the USA...More Details »
Description: 1968-1970 B-body Temperature Control Cable Reproduction cable for 1968-70 Mopar B-body models that connects the control levers to the control valve. Made in the USA Authentic Mopar Restoration...More Details »
Description: 1968-1970 B-body Dash Vent Cable- Drivers (Left) Side Reproduction under dash vent cable with correct knobs for 1968-1970 Mopar B-body models. Designed and manufactured to replicate the original...More Details »
Description: Correct set of reproduction vent frames finished in bright chrome for all 2 door cars, does not fit convertibles. Complete set includes the forward vent window posts, lower window frames, and...More Details »
Description: Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits: 1968,1969,1970...More Details »
Description: Chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets and hardware. Sold as a pair. Fits:...More Details »
Description: High quality reproduction manufactured to OE specification for an authentic appearance. Includes mounting screws.
Set of 4 moldings
Made in the USA.
Does not fit 1969 GTX or 1969 Sport Satellite
Description: Value priced reproduction spoiler kit includes the following: wing blade constructed of high-density black polyethylene plastic supplied in primer; wing to pedestal attachment brackets; (2)...More Details »
Description: Perfect stamped steel reproductions of the brackets used to distribute the weight and force of the wing style spoilers to the underside panel of the deck lid on 1970 Plymouth B-body models (except...More Details »
Description: Chrysler, Dodge, Plymouth 1970-71 Bucket Seat Foam Set 1970-71 molded foam for the following A, B, & E-Body models with high-back bucket seats. Sets consist of a pair of (2) front seat tops,...More Details »
Description: Our firewall gasket kits include gaskets for the following: steering column master cylinder accelerator pedal heater blower motor and heater tubes wiper pivot seals
Description: A complete paint gasket kit is an essential item to have when doing a complete body restoration. Die-cut for a precise fit and Made in the USA
Description: Heater Hose Bracket Bolts to right inner fender panel above shock tower. Includes correct hex head mounting screw.
Made from correct gauge steel and cadmium plated as original.
Description: Heater Hose Kits Our kits includes the grooved & marked hoses stamped with the original part numbers. Includes the spring clamps and a pair of heater hose straps. Air cars have extra length...More Details »
Description: FPHP123Includes the 23" lanyards, bezels, posts, pins and all necessary hardware for installation.For steel hood cars only.Please see our other products for those cars.Fits:1970,1971,1972,1973,1974...More Details »
Description: Mopar License Plate Frame Show the world what kind of car you are driving with our custom zinc plated license plate frame.Designed with top mounting holes and triple chrome plated for rust...More Details »
Description: 1966-1974 A-Body, 1966-1970 B-body, 1966-1968 C-body Mopar Bulkhead Connector Plugs.
Set of the 3 plugs which are used for the engine, headlight and wiper.
Description: 10"" Front or Rear Arm Pads Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Colored arm pads are molded in color, not painted. Fits: 1966,1967 Plymouth...More Details »
Description: Mopar B-body Console Lens Reproduction plastic lens for the console lights Fits 4 speed or automatic consoles Sold as a pair. Fits: 1964,1965,1966,1967,1968,1969,1970 Plymouth Belvedere,...More Details »
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for battery tray. (2) required...More Details »
Description: Snap on windlace covers the quarter jamb pinch weld from the end of the sill plate to the top of the jamb.
Sold as a pair.
Available in black or white and are easily painted if you have a colored interior.
Description: Mopar 1967-70 B-body 4 Speed Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger,...More Details »
Description: Mopar 1967-70 B-body Automatic Center Console. Correct one piece injection molded console shell. Must reuse your old hardware and top plates Fits: 1967,1968,1969,1970 Dodge Charger,...More Details »
Description: 1968-1970 B-Body Reproduction Fuel Rallye Gauge Manufactured to the exact factory specifications and ready to install All of our gauges are Mopar Authentic Restoration Products
Description: 1968-1970 B-Body Reproduction Rallye Gauges Factory style Tic-Toc-Tac, has all of the correct markings. Tachometer face with white markings is designed to duplicate the original. Correctly...More Details »
Description: 1968-1970 B-Body Reproduction Oil Pressure Rallye Gauge Manufactured to the exact factory specifications and ready to install All of our gauges are Mopar Authentic Restoration Products
Description: Mopar Rocker Moldings Replace your missing or damaged rocker moldings with our replacement which features the proper finish and contours to the body like original. This is the wide molding, not...More Details »
Item #: DMPS-9707
Condition: New
Not Available
Oversize Shipping Fee-$24.99 Does not qualify for free shipping
Description: Mopar Steering Wheel Woodgrain Horn Pad.
A necessary item if you are upgrading to the woodgrain steering wheel or replacing your missing horn pad.
Horn button pad is designed for use on 1968-70...More Details »