Description: These are the rubber seals that go inside the rear metal channel of the front doors. This part is usually responsible for your windows rattling. Sold as a pair and includes the mounting rivets
Description: Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with electric or manual foot pump...More Details »
Description: 1960-1969 Battery Hold Down J-Bolt Set. Short J-bolt must be shortened 1" for 1966 and earlier A-Body applications.
Zinc phosphate J-bolts with CORRECT heavy gauge wing nuts and 1/4" flat washers.
Description: 1966 B-body Positive Battery Cable for cars with a Hemi and Automatic Transmission.
Show quality reproduction with the correct terminals. Includes the correct dark color bolt and nut as original.
Description: 1966 B-body Positive Battery Cable for cars with a Hemi and Manual Transmission.
Show quality reproduction with the correct terminals. Includes the correct dark color bolt and nut as original.
Description: 1966-1967 B-body chrome plated door handles! Every handle is hand assembled and inspected to insure only the highest quality. Includes door handle gaskets. Sold as a pair. Fits: 1966,1967 Dodge...More Details »
Description: 1966-1967 B-body Dash Air Conditioning Cable- Drivers (Left) Side Reproduction under dash air conditioning cable with correct knob for 1966-1967 Mopar B-body models. Designed and manufactured to...More Details »
Description: 1966-1967 B-body Dash Vent Cable- Drivers (Left) Side Reproduction under dash vent cable with correct knobs for 1966-1967 Mopar B-body models. Designed and manufactured to replicate the original...More Details »
Description: 1966-1967 B-body Dash Vent Cable- Passenger (Right) Side Reproduction under dash vent cable with correct knobs for 1966-1967 Mopar B-body models. Designed and manufactured to replicate the...More Details »
Description: Chrysler, Dodge, Plymouth 1966-67 Bucket Seat Foam Set A & B-Body Chrysler, Dodge, Plymouth 1966-67 molded foam for all A & B-Body models with bucket seats. Sets consist of a pair of (2)...More Details »
Description: Our firewall gasket kits include gaskets for the following: steering column master cylinder accelerator pedal heater blower motor and heater tubes wiper pivot seals
Description: A complete paint gasket kit is an essential item to have when doing a complete body restoration. Die-cut for a precise fit and Made in the USA
Description: Heater Hose Kits Our kits includes the grooved & marked hoses stamped with the original part numbers. Includes the spring clamps and a pair of heater hose straps. Air cars have extra length...More Details »
Description: Hose Clamp Kit Our kits includes the correct style and color spring clamps for the heater hoses and radiator hoses. Available for non-air conditioning cars only.
Description: 1966-1974 A-Body, 1966-1970 B-body, 1966-1968 C-body Mopar Bulkhead Connector Plugs.
Set of the 3 plugs which are used for the engine, headlight and wiper.
Description: 10"" Front or Rear Arm Pads Used with our 13" front arm rest bases and our 10" rear arm bases Sold by the pair. Colored arm pads are molded in color, not painted. Fits: 1966,1967 Plymouth...More Details »
Description: Mopar B-body Console Lens Reproduction plastic lens for the console lights Fits 4 speed or automatic consoles Sold as a pair. Fits: 1964,1965,1966,1967,1968,1969,1970 Plymouth Belvedere,...More Details »
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for battery tray. (2) required...More Details »
Description: Main Fuel line available in either 5/16 or 3/8 size and in OE steel or Stainless.
All fuel lines are manufactured using state of the art CNC benders to ensure complete accuracy in fitment and safety
Description: 1966-1969 battery hold down kit for A & B-body cars, includes the correct zinc phosphate J-bolts with CORRECT heavy gauge wing nuts, 1/4" flat washers, and a thermo-plastic coated...More Details »
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and mounting bolt for battery tray. (1) required per...More Details »
Description: Snap on windlace covers the quarter jamb pinch weld from the end of the sill plate to the top of the jamb.
Sold as a pair.
Available in black or white and are easily painted if you have a colored interior.
Description: An excellent reproduction of the 1969 B- & C-Body 22" V-8 radiator fan shroud. Original part number 2949 130. Correct for 1969 440 powered cars with 22" radiator including Chargers, R/T's,...More Details »
Description: The kit includes (4) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (8) 1/4-20 x 1/2" hex head coni sems bolts to mount the parts together....More Details »
Description: Mopar Carpet Fits: 1966 Dodge Charger Two piece molded 80/20 Loop carpet which features the correct heel pad and jute backing. Includes the cargo floor, wheel wells, front and rear seat backs,...More Details »
Description: Mopar Ashtray Console & Arm Pads Sold individually Fits: 1971-1974 E-body & B-body center console 1970 E-body rear panels 1966-70 B-Body Armrests (Must Trim Bezel to Fit Armrest) More Details »
Description: Mopar Carpet Fits: 1966-1970 B-body 2 door or 4 door cars with automatic transmission either on the column or floor shift. Two piece molded 80/20 Loop carpet which features the correct heel pad...More Details »
Description: Mopar Carpet Fits: 1966 Dodge Charger Two piece molded 80/20 Loop carpet which features the correct heel pad and jute backing. Includes Passenger area, door panels, quarter trim, wheel wells,...More Details »
Description: Used on 1966-69 B-Body vehicles. Correct gauge metal and details of originals. Comes e-coated black. Fits:1966,1967,1968,1969 Plymouth Belvedere, Satellite1967,1968,1969 Plymouth...More Details »
Description: Mopar Seat Hinge Covers One pair does one bench seat. Beautiful injection molded ABS paintable part. Available in black or white and installation hardware is included Fits: 1964-1967...More Details »
Description: Our body plug kits are exactly like original and are a perfect finishing touch to your restoration. These plug kits will do the floor pan and trunk pan. Please see our other listing (BM531) for the door frame plug kit
Description: All of our brake line kits are manufactured using state of the art CNC benders to ensure an accurate OE fit. Available in OE steel or Stainless Fits: 1966 Dodge Charger, Coronet 1966 Plymouth...More Details »
Description: Our bundle kits allow you to purchase our most requested items at a terrific bundle price. This bundle kit will fit all 1968-1970 Dodge Charger, 1967-1970 C-body and some 1966-1967 B-body (measure...More Details »
Description: Mopar Manual 4spd Console Carpet Fits: 1966-1970 B-body center consoles with 4 speed manual transmission. . Your choice of 80/20 or Cutpile carpet. NOTE: Carpets are custom-made to order and...More Details »
Description: Mopar Carpeted Floor Mats Four piece floor mat set. Two front mats have the embroidered logo, the rear mats are plain. Floor Mats are die cut based on your year, make, and model vehicle,...More Details »
Description: Mopar Rear Chrome Arm Rest Bases 1966-1970 B-body Replace your worn out and faded arm bases with these reproductions that have the correct shape and chrome finish like OE. One pair. Fits:...More Details »
Description: Mopar Clutch Z-bar Rebuild Kits Mopar Clutch bell crank bell housing ball stud for 1966-74 B-body & E-Body manual transmission applications.Mounts to the bell housing. Zinc plated to resist...More Details »
Description: Mopar Clutch Z-bar Rebuild Kits Mopar Clutch Bell Crank Ball Studs for 1966-74 B-Body and E-Body manual transmission applications.The longer ball stud mounts to the bell housing, and the shorter...More Details »
Description: Mopar Clutch Z-bar Rebuild Kits Mopar Clutch Bell Crank Frame Bracket. An exact reproduction of the E-Body & 1966-74 B-Body factory frame rail mounting bracket for the clutch bell crank ball...More Details »
Description: Mopar Clutch Z-bar Rebuild Kits Mopar Clutch Bell Crank Frame Bracket Kit. Comes complete with E-Body & 1966-74 B-Body frame rail bracket, both ball studs, conical washer and nut. A must for...More Details »
Description: Mopar Clutch Fork & Rod Kits Parts Clutch Fork Return Spring (1) Required Used on all Big Block applications after 1965 and Small Block B & E-Body applications. Heavy duty spring used to...More Details »
Description: Mopar Clutch Fork & Rod Kits Parts Clutch Release Rod (1) Required Angled rod used on 1970-74 E-Body Small Block applications, and 1962-70 B-Body Big & Small Block applications. Made from...More Details »
Description: Mopar Clutch Fork & Rod Kits Parts Clutch Release Rod Service Kit (1) Required Angled rod kit used on Small Block E-body and 1966-1970 B-body Big & Small Block. Comes complete with...More Details »