Description: Injection molded plastic reproduction pillar post moldings, correct OE grain and fits perfect. Available with two different screw locations, the 1970 style and 1971-1973 style. Correct for a...More Details »
Description: Mopar Sail Boards These die-cut boards are cut to the same size as originals and are a must needed item when replacing your headliner as these are often warped or water damaged. They come covered...More Details »
Description: Value priced reproduction spoiler kit includes the following: wing blade constructed of high-density black polyethylene plastic supplied in primer; wing to pedestal attachment brackets; (2)...More Details »
Description: 1970-1974 E-body Air Conditioning Control Cable Reproduction air conditioning control cable for 1970-1974 Mopar E-body models, connects the control levers to the control valve. Measures 71" long...More Details »
Description: 1970-1974 E-body Heater Control Cable Reproduction heater/defrost cable for 1970-1974 Mopar E-body models without air conditioning Cable measures 37" Made in the USA Authentic Mopar Restoration...More Details »
Description: 1970-1974 E-body Temperature Control Cable Reproduction temperature control cable for 1970-1974 Mopar E-body models without air conditioning. Goes from the knob to the heater control valve. Made...More Details »
Description: Complete hardware set used to mount the 3-piece molding set that installs onto the deck lid and the quarter panel.
Fits:
1970-1974 Challenger
1970-1971 Barracuda Gran Coupe only
1972-1974 Barracuda/Cuda
Description: Every handle is hand assembled and inspected to insure only the highest quality and features the correct contour. Sold as a pair. Fits: 1970,1971,1972,1973,1974 Plymouth Barracuda, Cuda
Description: Concours quality reproductions molded in black polyethylene plastic, as original. Superior in durability to incorrect fiberglass reproductions. Placement instructions and correct style mounting...More Details »
Description: These rear window louvers are made by Dale's Cuda Shop right here in the USA. They hand assembled with great detail and craftsmanship, made with highest quality aluminum. Powder coated for weather...More Details »
Item #: DMPS-5931
Condition: New
Limited Supply: Only 0 Left!
Does not qualify for Free Shipping. Discount exempt
Description: An excellent reproduction of the gearshift control assembly used on console shifted 1971-74 B & E-Body cars with automatic transmission. If your car is equipped with a T-Handle shifter, this is...More Details »
Description: 1971-1974 E-body Dash Vent Cable- Pasenger (Right) Side Reproduction under dash vent cable with correct knobs for 1971-1974 Mopar E-body models. Designed and manufactured to replicate the original...More Details »
Description: 1971-1974 E-body Dash Vent Cable- Drivers (Left) Side Reproduction under dash vent cable with correct knobs for 1971-1974 Mopar E-body models. Designed and manufactured to replicate the original...More Details »
Description: 1970-1974 E-body ammeter gauge for Rallye gauge cluster only. Gauge features correct white markings with red needle and is designed to replace the original gauge exactly. Fits: 1970-1974 Dodge...More Details »
Description: 1970-1974 E-body oil gauge for Rallye gauge cluster only. Gauge features correct white markings with red needle and is designed to replace the original gauge exactly. Fits: 1970-1974 Dodge...More Details »
Description: These Are The Correct Style Belt Strip For The 'E' Body Door Panels. These Belt Strips Fasten Like The Original, By Pushing Over The Edge Of The Door Panel. Made in the USA
Description: Mopar Rallye Road Wheels and Center Caps 1972-1974 all models Priced set of 4. Available in small (A-body) and big (E and B body) bolt patterns.Priced set of 4.
Description: Our firewall gasket kits include gaskets for the following: steering column master cylinder accelerator pedal heater blower motor and heater tubes wiper pivot seals
Description: A complete paint gasket kit is an essential item to have when doing a complete body restoration. Die-cut for a precise fit and Made in the USA
Description: Heater Hose Bracket 1969-1974 Air Conditioning Big Block Applications. Bolts to alternator triangle.
Made from correct gauge steel, cadmium plated & thermo-plastic coated for original appearance.
Description: Heater Hose Kits Our kits includes the grooved & marked hoses stamped with the original part numbers. Includes the spring clamps and a pair of heater hose straps. Air cars have extra length...More Details »
Description: FPHP123Includes the 23" lanyards, bezels, posts, pins and all necessary hardware for installation.For steel hood cars only.Please see our other products for those cars.Fits:1970,1971,1972,1973,1974...More Details »
Description: Attaches to the fender and are used to secure the hood pin stud. Used with steel and fiberglass hoods. Priced per pair. Fits: 1970,1971,1972,1973,1974 Plymouth Barracuda, Cuda Dante's...More Details »
Description: Correctly reproduced "Cuda 383" hood emblem used on the 1970-1971 Plymouth Cuda with Shaker hood
Emblem has 3 posts.
Sold each. Two needed per car.
Description: Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for battery tray. (2) required...More Details »
Description: Metro Seat Backs A-body, B-body and E-body Injection molded seat backs featuring the correct grain. The highest quality seat back made, a must for any high level restoration. Sold as a pair....More Details »
Description: Spring loaded hood wedges mount on each side to keep the hood in alignment. Screws not included Sold as a pair Fits: 1970,1971,1972,1973,1974 Dodge Challenger 1970,1971,1972,1973,1974...More Details »
Description: 1970-74 E-body 8K Tach for Rallye gauge cluster only. Gauge features correct black with white, yellow and red markings with the red needle It is designed to replace the original gauge exactly....More Details »
Description: 1970-1974 E-body fuel gauge for Rallye gauge cluster only. Gauge features correct white markings with red needle and is designed to replace the original gauge exactly. Fits: 1970-1974 Dodge...More Details »
Description: 1970-1974 E-body temperature gauge for Rallye gauge cluster only. Gauge features correct white markings with red needle and is designed to replace the original gauge exactly. Fits: 1970-1974...More Details »
Description: Reproduction of the correct Anco style wiper arms. Made from stamped and formed polished stainless steel and a chrome plated cap with correct design spline. Sold as a pair. See part #7601 for the...More Details »
Description: Reproduction of the correct Anco style 16" wiper blades,made from stamped steel with a quality rubber insert. Fits various cars that have the "pin" style wiper arm.
Sold as a pair.
Description: Replace your often pitted or missing hood scoop inserts with these authentic looking reproductions. Manufactured for an accurate appearance, these will fit just like the originals. Sold as a pair.
Description: Used on 1970-72 B-Body & 1970-74 E-Body vehicles. Correct gauge metal and details of originals. Comes e-coated black. B-Body brace mounting hole must be drilled....More Details »
Description: All fuel lines are manufactured using state-of-the-art CNC benders to guarantee 100% accuracy, safety and fit.
Available in OE steel or Stainless.
Description: All fuel lines are manufactured using state-of-the-art CNC benders to guarantee 100% accuracy, safety and fit.
Available in OE steel or Stainless.
Description: 1972-1974 B- & E-Bod y battery hold down kit includes the correct zinc phosphate J-bolts with hex coni SEMS nuts, fender mounting bolt, and a thermo-plastic coated cross bracket....More Details »
Description: 1972-74 E-body clock for Rallye gauge cluster only. Gauge features correct white markings and correct needle color. It is designed to replace the original gauge exactly. Fits: 1970-1971...More Details »
Description: An excellent reproduction of the 1970-73 B- & E-Body 22" V-8 radiator fan shroud. Original part number 2998 328. Correct for all V-8 cars using a fan shroud with 22" radiator including 318,...More Details »
Description: The kit includes (2) powder coated formed steel brackets, (4) correct 1/4-20 cage nuts for the radiator side brackets, and (4) 1/4-20 x 1/2" hex head coni sems bolts to mount the brackets to the...More Details »
Description: An excellent Chrysler reproduction of the 1970-1973 B & E-body fan shroud for use with the 26" OE radiator. Has all of the correct ribs and flanges. Has 2 mounting holes on the left and 2...More Details »
Description: Two piece molded 80/20 Loop carpet which features the correct heel pad and jute backing. Your choice of 80/20 or Cutpile carpet. NOTE: Carpets are custom-made to order and are NOT returnable for...More Details »
Description: Mopar Dash Pads E-body. Reproduction molded dash pads on an ABS frame. OE style dash pad is vinyl just like the original to offer a superior fit and has a grain that is as close to the original as...More Details »
Description: Alternator Adjustment Strap-1969-74 B & E-Body Big Block applications with Air Conditioning without Leece-Neville alternator. A quality reproduction alternator adjusting strap...More Details »
Description: Alternator Adjustment Strap-1970-74 B & E-Body Small Block applications with Air Conditioning A quality reproduction alternator adjusting strap formed from the correct gauge steel...More Details »