Mopar E-Body Interior Kit C Includes the following:Front bucket/bench seat cover and rear seat cover, headliner and carpet.Available in black or white, other colors available please call to dis...
Description: Mopar E-Body Interior Kit C Includes the following:Front bucket/bench seat cover and rear seat cover, headliner and carpet.Available in black or white, other colors available please call to...More Details »
Item #: DMPS-3173
Condition: New
Does not qualify for Free Shipping. Oversize fee $50.00
Price: $1,249.99
Mopar E-body Lock LeversNew
E-body door lock levers. Sold as a pair Fits: 1970,1971,1972,1973,1974 Dodge Challenger 1970,1971,1972,1973,1974 Plymouth Barracuda
Mopar E-Body Rallye Dash Gauge Indicator Lens Set Set of the die cut acrylic lens in the correct color and font. Includes: Green "Right" lens, Green "Left" lens and Red "Brake" Lens Fit...
Description: Mopar E-Body Rallye Dash Gauge Indicator Lens Set Set of the die cut acrylic lens in the correct color and font. Includes: Green "Right" lens, Green "Left" lens and Red "Brake" Lens ...More Details »
Item #: DMPS-10146-1489
Condition: New
Price: $44.99
Mopar E-Body Sheet Metal 4 speed tunnel hump 70-74 E-bodyNew
Reproduction 4 Speed Tunnel Hump has all of the same contours as original.
Very nice reproduction the the "R/T" grille emblem. Beautifully crafted and made to the original specifications, it fits and looks just like the original.
Description: Very nice reproduction the the "R/T" grille emblem. Beautifully crafted and made to the original specifications, it fits and looks just like the original.
Item #: DMPS-3606
Condition: New
Price: $54.99
Mopar Exhaust Hangers 1970-1974 E-body Cuda ChalllengerNew
Exhaust Hangers 1970-1974 E-body These are the hangers that are located in front of the rear axle and attach to the brackets on the floor pan and support the resonators. Sold as a pair F...
Description: Exhaust Hangers 1970-1974 E-body These are the hangers that are located in front of the rear axle and attach to the brackets on the floor pan and support the resonators. Sold as a pair ...More Details »
Item #: DMPS-6917
Condition: New
Price: $79.99
Mopar Exhaust Heat Shield- 70-74 E-body Cuda ChallengerNew
Sold as a pair Replace you missing or rusty exhaust heat shield with this accurate reproduction. Fits: 1970-1974 Dodge Challenger 1970-1974 Plymouth Barracuda
Description: Sold as a pair Replace you missing or rusty exhaust heat shield with this accurate reproduction. Fits: 1970-1974 Dodge Challenger 1970-1974 Plymouth Barracuda
Description: Correct bolts, studs, nuts, & sleeve nuts for all 1968-74 383/440 HP except C-body
Item #: DMPS-6897-8065
Condition: New
Price: $49.99
Mopar Fan Clutch 1970-1971 Big Block & Hemi, 1970 340 without Air Conditioning-Concours New
Show quality concours reproduction of the "070" 1970-71 fan clutch used on all Big Block, Hemi and 1970 340 cars without air conditioning.
Features the correct face, fins and bolt spacing. Repl...
Description: Show quality concours reproduction of the "070" 1970-71 fan clutch used on all Big Block, Hemi and 1970 340 cars without air conditioning.
Features the correct face, fins and bolt spacing....More Details »
Item #: DMPS-3164
Condition: New
Price: $329.99
Mopar Flip Top Gas Cap Security Screw KitNew
Replace you incorrect screws with our correct security screw head kit. Includes the 4 security screws and special 1/4" socket tool.
Description: Replace you incorrect screws with our correct security screw head kit. Includes the 4 security screws and special 1/4" socket tool.
Item #: DMPS-9213
Condition: New
Price: $32.99
Mopar Flip Top Gas Cap Trim Ring Bezel-1970-1974 Dodge ChallengerNew
Flip Top Gas Cap Trim Ring Bezel Very nice reproduction of the Flip Top gas cap bezel used in conjunction with the Challenger flip top gas cap. Fits: 1970,1971,1972,1973,1974 Dod...
Description: Flip Top Gas Cap Trim Ring Bezel Very nice reproduction of the Flip Top gas cap bezel used in conjunction with the Challenger flip top gas cap. Fits: 1970,1971,1972,1973,1974...More Details »
Item #: DMPS-9258
Condition: New
Price: $24.99
Mopar Flip Top Gas Cap-1970-1974 Dodge ChallengerNew
Flip Top Gas Cap Very nice reproduction of the Flip Top gas cap used on the 1970-1971 Challenger R/T. Built to factory specifications, chrome plated cap with chrome "FUEL" lettering on a black bac...
Description: Flip Top Gas Cap Very nice reproduction of the Flip Top gas cap used on the 1970-1971 Challenger R/T. Built to factory specifications, chrome plated cap with chrome "FUEL" lettering on a black...More Details »
Item #: DMPS-9215
Condition: New
Price: $89.99
Mopar Four Speed Shifter Boot Trim Ring-1970-1974 E-body, 1971-1974 B-bodyNew
Description: Replace you rusty or damaged front bumper brackets with these accurate reproductions.
Item #: AMDS-10047
Condition: New
Price: $199.99
Mopar Front Floor Pan Patch LH- 1970-1974 E-body, 1971-1974 B-bodyNew
Drivers Side Floor pan partial patch, replacing the sheetmetal in the well area. Fits: 1970-1974 Dodge Challenger 1970-1974 Plymouth Barracuda 1971-1974 Dodge Charger 1971-1974 Plymouth Road R...
Description: Drivers Side Floor pan partial patch, replacing the sheetmetal in the well area. Fits: 1970-1974 Dodge Challenger 1970-1974 Plymouth Barracuda 1971-1974 Dodge Charger 1971-1974 Plymouth Road...More Details »
Item #: DMPS-3687
Condition: New
Does not qualify for Free Shipping
Price: $109.99
Mopar Front Floor Pan Patch RH- 1970-1974 E-body, 1971-1974 B-bodyNew
Passenger Side Floor pan partial patch, replacing the sheetmetal in the well area. Fits: 1970-1974 Dodge Challenger 1970-1974 Plymouth Barracuda 1971-1974 Dodge Charger 1971-1974 Plymouth Road...
Description: Passenger Side Floor pan partial patch, replacing the sheetmetal in the well area. Fits: 1970-1974 Dodge Challenger 1970-1974 Plymouth Barracuda 1971-1974 Dodge Charger 1971-1974 Plymouth Road...More Details »
Item #: DMPS-9985
Condition: New
Does not qualify for Free Shipping
Price: $109.99
Mopar Front License Plate Brackets -1970-1971 ChallengerNew
Very nice reproduction of the front license plate mounting bracket used on 1970-1971 Challenger. Made from correct gauge steel & powder coated low gloss black for better appearance...
Description: Very nice reproduction of the front license plate mounting bracket used on 1970-1971 Challenger. Made from correct gauge steel & powder coated low gloss black for better appearance...More Details »
Item #: DMPS-4007-LPB7071
Condition: New
Price: $32.00
Mopar Fuel Lines-1967-74 B-Body 318 2BBL Pump to Carb LinesNew
All of our transmission line kits are manufactured using state of the art CNC benders to insure an accurate OE fit. Available in OE steel or Stainless
Description: All of our transmission line kits are manufactured using state of the art CNC benders to insure an accurate OE fit. Available in OE steel or Stainless
Item #: DMPS-4498
Condition: New
Price: $29.99
Mopar Fuel Sending Unit Ground Strap 7" LongNew
Fuel tank ground strap. Measures 7" and will work on E-body cars. If you need the short 3.75" strap please see part #GS Available in steel only
Description: Fuel tank ground strap. Measures 7" and will work on E-body cars. If you need the short 3.75" strap please see part #GS Available in steel only
Item #: DMPS-11097-GSE
Condition: New
Price: $14.00
Mopar Fuel Tank Kits-1970-1974 E-body Challenger Barracuda CudaNew
Introducing our New Fuel Tank Kits! Everything you need to replace your fuel system all at a great price.Kit includes the following: New Fuel Tank New 5/16 or 3/8 stainless steel sending unit...
Description: Introducing our New Fuel Tank Kits! Everything you need to replace your fuel system all at a great price.Kit includes the following: New Fuel Tank New 5/16 or 3/8 stainless steel sending unit...More Details »
Item #: DMPS-4628
Condition: New
Ships Oversized
Price: $349.99
Mopar Fuel Tanks Gas Tank 1970 Dodge Challenger w/o ventsNew
Correct OE fuel tanks made with galvanized steel as original. Lock Ring Included. No vent lines
Description: All of our fuel line kits are manufactured using state of the art CNC benders to ensure an accurate OE fit. Available in OE steel or stainless
Item #: DMPS-4503
Condition: New
Price: $39.99
Mopar Fuel- 1970-1973 340 4BBL Pump to Carb LinesNew
All of our fuel line kits are manufactured using state of the art CNC benders to ensure an accurate OE fit. Available in OE steel or stainless
Description: All of our fuel line kits are manufactured using state of the art CNC benders to ensure an accurate OE fit. Available in OE steel or stainless
Item #: DMPS-4501
Condition: New
Price: $29.99
Mopar Glass-WindshieldNew
Mopar Glass, Windshield, Back Glass,Side Glass This premuim reproduction glass from Auto Metal Direct has the correct thickness and fit, is license by Chrysler, and includes the authentic Penta...
Description: Mopar Glass, Windshield, Back Glass,Side Glass This premuim reproduction glass from Auto Metal Direct has the correct thickness and fit, is license by Chrysler, and includes the authentic...More Details »
Description: Quarter window hardware kit.
One kit does both quarter
Item #: DMPS-3497-280085
Condition: New
Price: $44.99
Mopar Headlight Bezels-1970 Dodge ChallengerNew
Beautiful reproduction of the 1970 Challenger headlight bezels Manufactured to OE specs with the correct black accent paint. Sold as a pair. Fits: 1970 Dodge Challenger
Description: Beautiful reproduction of the 1970 Challenger headlight bezels Manufactured to OE specs with the correct black accent paint. Sold as a pair. Fits: 1970 Dodge Challenger
Item #: DMPS-7843-FP1000
Condition: New
Price: $389.99
Mopar Headliner 1970-1974 Dodge ChallengerNew
Mopar Headliner Headliners are available in either perforated or non-perforated Available in either 4 or 5 bows. Fits: 1970,1971,1972,1973,1974 Dodge Challenger Please note that actual...
Description: Mopar Headliner Headliners are available in either perforated or non-perforated Available in either 4 or 5 bows. Fits: 1970,1971,1972,1973,1974 Dodge Challenger Please note that actual...More Details »
Item #: DMPS-7966
Condition: New
Price: $119.99
Mopar Headliner Bow ClipNew
Correct reproduction of the headliner bow clip that is used to secure the headliner bows to the side rail. Two required per bow.
Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the las...
Description: Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the...More Details »
Correct reproduction of the headliner bows. 1970-1971 cars use bow retaining clips which slide into the slots along the roof line (see pic) 1972-1974 cars use bows that are dog-legged and snap in...
Description: Correct reproduction of the headliner bows. 1970-1971 cars use bow retaining clips which slide into the slots along the roof line (see pic) 1972-1974 cars use bows that are dog-legged and snap...More Details »
All hood-cowl seals include the correct clips pre-installed. Installs along the cowl and is used to keep water and debris from entering the engine compartment. Made in the USA Available ...
Description: All hood-cowl seals include the correct clips pre-installed. Installs along the cowl and is used to keep water and debris from entering the engine compartment. Made in the USA Available...More Details »
Item #: DMPS-3555
Condition: New
Price: $39.99
Mopar Ignition Switch-1970-1974 carsNew
Mopar Ignition Switch 1970-1974 cars without tilt wheel
Description: Quality reproduction inside door handles featuring all of the correct contours and mounting points. Sold as a pair Fits: 1970-1974 Dodge Challenger
Mopar Inside Rear View Mirror Replaces your often missing or damaged inside rear view mirror to exact OE specification right down to the exact grain pattern. Includes the mounting bracket and has...
Description: Mopar Inside Rear View Mirror Replaces your often missing or damaged inside rear view mirror to exact OE specification right down to the exact grain pattern. Includes the mounting bracket and has...More Details »
Item #: DMPS-9609-1751
Condition: New
Price: $99.99
Mopar Interior Screw Kits- 1970-1974 E-body Cuda ChallengerNew
Mopar Interior Screw Kits. These interior screw kits include all the necessary screws for your interior including, sill plates, upper windshield molding, coat hooks, dashboard dash light, steering ...
OE correct injection molded kick panels manufactured with the correct grain. Sold by the pair. Only available in black, but easily painted. Fits: 1970,1971,1972,1973,1974 Dodge C...
Description: OE correct injection molded kick panels manufactured with the correct grain. Sold by the pair. Only available in black, but easily painted. Fits: 1970,1971,1972,1973,1974 Dodge...More Details »
Item #: DMPS-10210
Condition: New
Price: $169.99
Mopar Lenses Tail Light 1970 Dodge ChallengerNew
Includes Gaskets. Includes all three lenses. Fits:1970 Dodge Challenger
Mopar Hood Pads for Insulation-Molded. Molded to the shape of the hood like original, used to insulate against engine noise and to protect the hood from high engine temperature. Clips sold separa...
Description: Mopar Hood Pads for Insulation-Molded. Molded to the shape of the hood like original, used to insulate against engine noise and to protect the hood from high engine temperature. Clips sold...More Details »
Item #: DMPS-7256-mo657
Condition: New
Oversize Shipping Fee-$19.99
Price: $109.99
Mopar OE Correct Injection Molded "Metro" Front Door Panels 1970-1974 Dodge ChallengerNew
These OE correct injection molded door panels (commonly know as the Metro panels) feature the correct texture and original grain pattern. 100% OE correct injection molded panels for the most accur...
Description: These OE correct injection molded door panels (commonly know as the Metro panels) feature the correct texture and original grain pattern. 100% OE correct injection molded panels for the most...More Details »
These OE correct injection molded door panels (commonly know as the Metro panels) feature the correct texture and original grain pattern. 100% OE correct injection molded panels for the most accur...
Description: These OE correct injection molded door panels (commonly know as the Metro panels) feature the correct texture and original grain pattern. 100% OE correct injection molded panels for the most...More Details »
Item #: DMPS-10029-70KDC_CP
Condition: New
Oversize Handling Fee $14.99
Price: $529.99
Mopar Oil Pan-1966-69 B-Body big block and 1970-71 B & E-Body 383 New
Excellent reproduction of the 5 quart (4 in pan + 1 in filter) "402" oil pan used on all 1966-69 B-Body big block and 1970-71 B & E-Body 383 applications. Produced from heavy gauge steel with corr...
Description: Excellent reproduction of the 5 quart (4 in pan + 1 in filter) "402" oil pan used on all 1966-69 B-Body big block and 1970-71 B & E-Body 383 applications. Produced from heavy gauge steel with...More Details »
Item #: DMPS-2308
Condition: New
Price: $189.99
Mopar Oil Pan-1970-1971 E/B-Body Hemi & 440New
A nice reproduction of the 7 quart (6 in pan + 1 in filter) oil pan used on 1970-71 440 and 426 Hemi B & E-Body applications. Includes correct internal baffles as original. Includes drain plug. ...
Description: A nice reproduction of the 7 quart (6 in pan + 1 in filter) oil pan used on 1970-71 440 and 426 Hemi B & E-Body applications. Includes correct internal baffles as original. Includes drain plug. Reference Chrysler part #2951 564.
Die-cut package tray which goes between the back of the rear seat and the rear window. Available in standard (no speaker slots) or deluxe (with speaker slots) The available jute insulation helps ...
Description: Die-cut package tray which goes between the back of the rear seat and the rear window. Available in standard (no speaker slots) or deluxe (with speaker slots) The available jute insulation helps...More Details »
Item #: DMPS-7056
Condition: New
Price: $59.99
Mopar Parking Brake Actuator Lever Set 1962-1975 10" Rear Drum BrakesNew
Mopar Parking Brake Actuator Lever Set. Parking brake actuator levers for 1962-75 applications with 10" rear drum brakes. Set includes pressed in pivot pins, a pair of zinc plated C-clips, and a pa...
Description: Mopar Parking Brake Actuator Lever Set. Parking brake actuator levers for 1962-75 applications with 10" rear drum brakes. Set includes pressed in pivot pins, a pair of zinc plated C-clips, and a...More Details »
Item #: DMPS-5742-660-1
Condition: New
Price: $49.99
Mopar Parking Brake Cable ClampNew
Nice reproduction of the clamp used to secure the upper parking brake cable to the parking brake actuator on 1966-70 B-Body, 1970 E-Body, and 1970-75 A-Body cars. Formed from correct gauge steel a...
Description: Nice reproduction of the clamp used to secure the upper parking brake cable to the parking brake actuator on 1966-70 B-Body, 1970 E-Body, and 1970-75 A-Body cars. Formed from correct gauge steel...More Details »
Description: Mopar Parking Brake Handle Includes new roll pin. Fits: 1966-1974 B-body 1970-1974 E-body
Item #: DMPS-7182
Condition: New
Price: $24.99
Sale: $19.99
Save: 20%
Save: $5.00
Mopar Parking Brake Strut Lever Set 1965-74 B-body, E body, 1973-76 A body 10" Rear DrumNew
Mopar Suspension Parts Mopar Parking Brake Strut Lever Set. Parking brake strut levers for 1965-74 B & E-Body and 1973-76 A-Body applications with 10" rear drum brakes. Also used on 1978-79 L...
Description: Mopar Suspension Parts Mopar Parking Brake Strut Lever Set. Parking brake strut levers for 1965-74 B & E-Body and 1973-76 A-Body applications with 10" rear drum brakes. Also used on 1978-79...More Details »
Factory style reproduction park lamp assemblies for 1970-74 Dodge Challenger and 1970 Dodge Charger models. Each assembly is manufactured to factory specifications with the correct housing, wire pi...
Description: Factory style reproduction park lamp assemblies for 1970-74 Dodge Challenger and 1970 Dodge Charger models. Each assembly is manufactured to factory specifications with the correct housing, wire...More Details »
Factory style reproduction park lamp assemblies for 1970-74 Dodge Challenger and 1970 Dodge Charger models. Each assembly is manufactured to factory specifications with the correct housing, wire pi...
Description: Factory style reproduction park lamp assemblies for 1970-74 Dodge Challenger and 1970 Dodge Charger models. Each assembly is manufactured to factory specifications with the correct housing, wire...More Details »
Description: Drivers Primered Sport Remote Mirror. Includes gasket, hardware and inside trim bezel. Fits: 1970 Dodge Challenger 1970 Plymouth Barracuda, Cuda
Description: Passenger Primered Sport Mirror. Includes gasket, hardware and inside trim bezel. Fits: 1970 Dodge Challenger 1970 Plymouth Barracuda, Cuda
Item #: DMPS-6680
Condition: New
Price: $99.99
Mopar Radiator 1970-1972 B/E Body Small Block V8 22" 4 Row with Automatic TransmissionNew
Replacement 22 inch 4 row radiator manufactured with copper/brass materials and designed to bolt in with no modifications to the original radiator support.
Fits all V8 small block B & E body cars ...
Description: Replacement 22 inch 4 row radiator manufactured with copper/brass materials and designed to bolt in with no modifications to the original radiator support.
Fits all V8 small block B & E body cars with automatic transmission.
Item #: DMPS-7273
Condition: New
Limited Supply: Only 1 Left!
DOES NOT QUALIFY FOR FREE FREIGHT
Price: $749.99
Mopar Radio Bezel E-body Challenger Barracuda CudaNew
E-body Radio Bezel Correct reproduction part featuring the textured finish.
Fits all except 1970 Dodge Challenger with Standard Dash
E-body Rally Dash Heater Control Bezel with Air Condition Correct reproduction part featuring the correct chrome and textured finishes. Fits: 1970, 1971,1972,1973,1974 Dodge Challenger 1970,1...
Description: E-body Rally Dash Heater Control Bezel with Air Condition Correct reproduction part featuring the correct chrome and textured finishes. Fits: 1970, 1971,1972,1973,1974 Dodge Challenger...More Details »
E-body Rally Dash Heater Control Panel Correct reproduction part featuring the correct chrome and textured finishes. This is for non A/C cars Fits: 1970, 1971,1972,1973,1974 Dodge Challenger 1...
Description: E-body Rally Dash Heater Control Panel Correct reproduction part featuring the correct chrome and textured finishes. This is for non A/C cars Fits: 1970, 1971,1972,1973,1974 Dodge Challenger...More Details »