- Home »
- Catalog
Dante's Mopar Parts » 1970, Barracuda
Products for:
- Year: 1970
- Model: Barracuda
View Universal items for: 1970 Barracuda
Browse Products
Description: Quarter window hardware kit.
One kit does both quarter
Item #: DMPS-3497-280085
Condition:
New
Price: $44.99
Description: Mopar Headliner Headliners are available in either perforated or non-perforated Available in either 4 or 5 bows. Fits: 1970,1971,1972,1973,1974 Plymouth Barracuda Matching sails boards...More Details »
Item #: DMPS-7967
Condition:
New
Price: $109.99
Description: Correct reproduction of the headliner bow clip that is used to secure the headliner bows to the side rail. Two required per bow.
Item #: DMPS-HLBC
Condition:
New
Price: $2.99
Description: Correct reproduction the headliner bow retainer wire. This little part is often missing but is necessary to properly install the headliner. The retainer spring hooks into the roof and holds the...More Details »
Item #: DMPS-7821
Condition:
New
Price: $16.99
Description: Correct reproduction of the headliner bows. 1970-1971 cars use bow retaining clips which slide into the slots along the roof line (see pic) 1972-1974 cars use bows that are dog-legged and snap...More Details »
Item #: DMPS-7033
Condition:
New
Oversize Handling Fee $9.99
Price: $109.99
Description: Priced per pair. Fits: 1970,1971,1972,1973,1974 Dodge Challenger1970,1971,1972,1973,1974 Plymouth BarracudaMore Details »
Item #: DMPS-4003-310-1570-P
Condition:
New
Price: $329.99
Description: All hood-cowl seals include the correct clips pre-installed. Installs along the cowl and is used to keep water and debris from entering the engine compartment. Made in the USA Available...More Details »
Item #: DMPS-3555
Condition:
New
Price: $39.99
Description: Mopar Ignition Switch 1970-1974 cars without tilt wheel
Item #: DMPS-10019
Condition:
New
Price: $59.99
Description: Quality reproduction inside door handles featuring all of the correct contours and mounting points. Sold as a pair Fits: 1970-1974 Plymouth Barracuda
Item #: DMPS-3479
Condition:
New
Price: $49.99
Description: Mopar Inside Rear View Mirror Replaces your often missing or damaged inside rear view mirror to exact OE specification right down to the exact grain pattern. Includes the mounting bracket and has...More Details »
Item #: DMPS-9609-1751
Condition:
New
Price: $99.99
Description: Mopar Interior Screw Kits. These interior screw kits include all the necessary screws for your interior including, sill plates, upper windshield molding, coat hooks, dashboard dash light, steering...More Details »
Item #: DMPS-9142
Condition:
New
Price: $56.99
Description: Die-cut using the correct yellow insulation to fit properly behind the kick panels and aids in reducing road noise. Sold by the pair.
Item #: DMPS-7031
Condition:
New
Price: $29.99
Description: OE correct injection molded kick panels manufactured with the correct grain. Sold by the pair. Only available in black, but easily painted. Fits: 1970,1971,1972,1973,1974 Dodge...More Details »
Item #: DMPS-10210
Condition:
New
Price: $169.99
Price: $6.99
Description: Mopar Hood Pads for Insulation-Molded. Molded to the shape of the hood like original, used to insulate against engine noise and to protect the hood from high engine temperature. Clips sold...More Details »
Item #: DMPS-7256-mo657
Condition:
New
Oversize Shipping Fee-$19.99
Price: $109.99
Description: These OE correct injection molded door panels (commonly know as the Metro panels) feature the correct texture and original grain pattern. 100% OE correct injection molded panels for the most...More Details »
Item #: DMPS-6291
Condition:
New
Oversize Shipping Fee-$14.99
Price: $519.99
Description: These OE correct injection molded door panels (commonly know as the Metro panels) feature the correct texture and original grain pattern. 100% OE correct injection molded panels for the most...More Details »
Item #: DMPS-6281-70KDB
Condition:
New
Oversized shipping fee $14.99
Price: $519.99
Description: These OE correct injection molded door panels (commonly know as the Metro panels) feature the correct texture and original grain pattern. 100% OE correct injection molded panels for the most...More Details »
Item #: DMPS-6292
Condition:
New
Oversize Shipping Fee-$14.99
Price: $529.99
Description: Excellent reproduction of the 5 quart (4 in pan + 1 in filter) "402" oil pan used on all 1966-69 B-Body big block and 1970-71 B & E-Body 383 applications. Produced from heavy gauge steel with...More Details »
Item #: DMPS-2308
Condition:
New
Price: $189.99
Description: A nice reproduction of the 7 quart (6 in pan + 1 in filter) oil pan used on 1970-71 440 and 426 Hemi B & E-Body applications. Includes correct internal baffles as original. Includes drain plug. Reference Chrysler part #2951 564.
Item #: DMPS-0564
Condition:
New
Price: $169.99
Description: Die-cut package tray which goes between the back of the rear seat and the rear window. Available in standard (no speaker slots) or deluxe (with speaker slots) The available jute insulation helps...More Details »
Item #: DMPS-7056
Condition:
New
Price: $59.99
Description: Nice reproduction of the clamp used to secure the upper parking brake cable to the parking brake actuator on 1966-70 B-Body, 1970 E-Body, and 1970-75 A-Body cars. Formed from correct gauge steel...More Details »
Item #: DMPS-2534
Condition:
New
Price: $19.99
Description: Mopar Parking Brake Handle Includes new roll pin. Fits: 1966-1974 B-body 1970-1974 E-body
Item #: DMPS-7182
Condition:
New
Price: $24.99
Sale: $19.99
Save: 20%
Save: $5.00
Description: Mopar Suspension Parts Mopar Parking Brake Strut Lever Set. Parking brake strut levers for 1965-74 B & E-Body and 1973-76 A-Body applications with 10" rear drum brakes. Also used on 1978-79...More Details »
Item #: DMPS-5750-9823
Condition:
New
Price: $29.99
Description: Replace your broken or missing parking light assemblies, these are made to OE specifications for an exact fit. Priced as a pair.
Item #: DMPS-4117
Condition:
New
Price: $249.99
Description: Drivers Primered Sport Remote Mirror. Includes gasket, hardware and inside trim bezel. Fits: 1970 Dodge Challenger 1970 Plymouth Barracuda, Cuda
Item #: DMPS-6678
Condition:
New
Price: $139.99
Description: Passenger Primered Sport Mirror. Includes gasket, hardware and inside trim bezel. Fits: 1970 Dodge Challenger 1970 Plymouth Barracuda, Cuda
Item #: DMPS-6680
Condition:
New
Price: $99.99
Description: Replacement 22 inch 4 row radiator manufactured with copper/brass materials and designed to bolt in with no modifications to the original radiator support.
Fits all V8 small block B & E body cars with automatic transmission.
Item #: DMPS-7273
Condition:
New
Limited Supply: Only 1 Left!
DOES NOT QUALIFY FOR FREE FREIGHT
Price: $749.99
Description: E-body Radio Bezel Correct reproduction part featuring the textured finish.
Fits all except 1970 Dodge Challenger with Standard Dash
Item #: DMPS-TPER
Condition:
New
Not Available
Price: $84.99
Description: E-body Rally Dash Heater Control Bezel with Air Condition Correct reproduction part featuring the correct chrome and textured finishes. Fits: 1970, 1971,1972,1973,1974 Dodge Challenger...More Details »
Item #: DMPS-8212
Condition:
New
Price: $259.99
Description: E-body Rally Dash Heater Control Panel Correct reproduction part featuring the correct chrome and textured finishes. This is for non A/C cars Fits: 1970, 1971,1972,1973,1974 Dodge Challenger...More Details »
Item #: DMPS-8211
Condition:
New
Price: $179.99
Description: Update to appearance of your rally dash with these easy to install decals. This is for 1970/71 style rallye dashes where the reset knobs come out through the bezel.. Fits: 1970,1971...More Details »
Item #: DMPS-9999
Condition:
New
Price: $49.99
Description: High quality chrome rear bumper. Plated in the USA Fits: 1970,1971,1972 Plymouth Barracuda, Cuda 1970,1971,1972 Dodge Challenger
Item #: DMPS-6702
Condition:
New
Not Available
Oversize Handling Fee $14.99
Price: $699.99
Price: $119.99
Description: Rear Chrome Bumper Guards.For use with cars that do not have the rubber insertsSold as a pair Fits:1970,1971,1972 Plymouth Barracuda More Details »
Item #: DMPS-6698
Condition:
New
Price: $109.99
Description: Rear license plate assembly Fits:1970,1971,1972,1973,1974 Plymouth Barracuda, Cuda
Item #: DMPS-4013-2218
Condition:
New
Price: $79.99
Description: Replacement license lamp lens includes gasket and screws Fits:1970, 1971,1972,1973,1974 Plymouth Barracuda
Item #: DMPS-7517-LPL2
Condition:
New
Price: $16.99
Description: Mopar Rim Blow Steering Wheel Center Cap used on 1970 Plymouth Barracuda/Cuda Rim Blow Steering Wheel. Molded in black with the correct authentic Barracuda fish emblem, this was used on
all 1970...More Details »
Item #: DMPS-1859
Condition:
New
Price: $149.99
Description: Mopar Rim Blow Steering Wheel Kit for the 1970 Plymouth Barracuda/Cuda & Very nice reproduction of the Rim Blow steering wheel, includes the "crush" can, horn cap and attaching nuts.
While correct...More Details »
Item #: DMPS-1861
Condition:
New
Price: $746.99
Description: Mopar Rim Blow Steering Wheel. Very nice reproduction of the Rim Blow steering wheel used on 1970-1971 E-body, 1971 B-body.
Includes horn activated switch around the inner ring.
While the S83...More Details »
Item #: DMPS-4020
Condition:
New
Price: $539.99
Description: Roof Rail Weatherstrip. High quality seals made with the correct extruded rubber to ensure an accurate fit. All weatherstrip is sold in pairs only.
Item #: DMPS-3544
Condition:
New
Price: $94.99
Description: This Legendary product features as-original heat sealed Ranger grain inserts with Coachman grain skirts. Priced per pair.
Item #: DMPS-5031-AA70CB00010(C)
Condition:
New
Price: $596.99
Description: This Legendary product features as-original heat sealed Houndstooth cloth inserts with Coachman grain skirts. Priced per pair. We will not be undersold and will match or beat any competitor's printed price!
Item #: DMPS-5019-AA70CBC0010(C)
Condition:
New
Does not qualify for Free Shipping.
Price: $1,102.99
Description: This Legendary product features as-original heat sealed Houndstooth cloth inserts with Coachman grain skirts. Priced each.
Item #: DMPS-5022-AA70CBC0040(C)
Condition:
New
Does not qualify for Free Shipping.
Price: $771.99
Description: This Legendary product features as-original heat sealed Shallow Elk grain inserts & accent belts with Ranger grain inset panel & Coachman grain skirts. Metal emblems not included. Priced...More Details »
Item #: DMPS-5027
Condition:
New
Price: $370.99
Description: This Legendary product features as-original heat sealed Shallow Elk grain inserts & accent belts with Ranger grain inset panel & Coachman grain skirts. Metal emblems not included. Priced...More Details »
Item #: DMPS-5024-AA70CBD0010(C)
Condition:
New
Price: $601.99
Description: This Legendary product features as-original HEAT SEALED SHALLOW ELK GRAIN INSERTS AND ACCENT BELTS WITH RANGER GRAIN INSET PANEL AND COACHMAN GRAIN SKIRTS. Priced per pair.
Item #: DMPS-5032-AA70CBD0010(C)
Condition:
New
Price: $619.99
Description: This Legendary product features as-original heat sealed Ranger grain inserts with Coachman grain skirts. We will not be undersold and will match or beat any competitor's printed price!
Item #: DMPS-5078-AA70CB00030(C)
Condition:
New
Price: $655.99
Description: This Legendary product features as-original heat sealed Ranger grain inserts with Coachman grain skirts. Priced each. We will not be undersold and will match or beat any competitor's printed price!
Item #: DMPS-5029
Condition:
New
Price: $403.99
Description: This Legendary product features as-original HEAT SEALED SHALLOW ELK GRAIN INSERTS AND ACCENT BELTS WITH RANGER GRAIN INSET PANEL AND COACHMAN GRAIN SKIRTS.
Item #: DMPS-5030
Condition:
New
Price: $424.99
Description: This Legendary product features as-original heat sealed Leather inserts with Coachman grain skirts. Priced per pair. Made in the USA
Item #: DMPS-5034-AA70CBL0010(C)
Condition:
New
Does not qualify for Free Shipping. Discount exempt
Price: $1,133.99
Description: This Legendary product features as-original heat sealed insert with Coachman grain skirts. Rear seat cover is all vinyl, to be used with the leather front bucket seat covers.
Item #: DMPS-5036
Condition:
New
Price: $423.99
Description: Mopar Seat Hardware and Components 7392K- 70-72 E & B-body cars. Seat Stop Bumpers with studs. Sold as a pair. Fits: 1970,1971,1972 Dodge Challenger, Charger 1970,1971,1972 Plymouth...More Details »
Item #: DMPS-3169-7392K
Condition:
New
Price: $29.99
Description: Mopar Seat Hardware and Components 7392K- 70-72 E & B-body cars. Seat Stop Bumpers Sold as a pair. Fits: 1970,1971,1972 Dodge Challenger, Charger 1970,1971,1972 Plymouth Barracuda, Cuda,...More Details »
Item #: DMPS-6084-FW739
Condition:
New
Price: $18.00
Description: 1970-1974 A/B/E-Body Bucket Seat Latch Set Bucket seat latch and spacer sets fit most A/B/E-Body bucket seats. Replace your worn or missing latches today to keep your seats from folding forward....More Details »
Item #: DMPS-3161-BK7074
Condition:
New
Price: $34.99
Description: 1970-1974 A/B/E-Body Bucket Seat Back Pivot Bolt Kit Each kit includes two black zinc plated hardened shoulder bolts and two black zinc plated flat washers. This kit is reproduced to the 1970 and...More Details »
Item #: DMPS-3162
Condition:
New
Price: $29.99
Description: Shaker Hood Scoop Grilles The most authentic and closest to OE grilles on the market. Made of die-cast metal (not Fiberglass like most reproductions) just like the original and painted semi-gloss...More Details »
Item #: DMPS-10096-JVSHG
Condition:
New
Not Available
Price: $359.99
Description: Mopar Sound Deadener Carpet 1963-1966 A-body,1966-1974 B-body, 1970-1974 E-body Addtional sound deadener to place under the floor carpet to insulate the vehicle from road noise and heat. Sound...More Details »
Item #: DMPS-7413
Condition:
New
Does not qualify for Free Shipping.
Price: $79.99
Description: Spare tire hardware kit, includes the stud, wing nut and mounting bolt (not shown in picture). Our reproductions are the correct length, shape and plating as original.
Fit all E-body car with a full size spare.
Item #: DMPS-3507
Condition:
New
Price: $29.99
Description: Spare tire hardware kit, includes the stud, wing nut and mounting bolt (not shown in picture). Our reproductions are the correct length, shape and plating as original.
Fit all E-body car with a space saver spare.
Item #: DMPS-3505
Condition:
New
Price: $29.99