Die cut black fiberboard panel that goes behind the rear seat to separate the trunk compartment. Jute insulation is available and helps reduce road noise and heat.
Description: Die cut black fiberboard panel that goes behind the rear seat to separate the trunk compartment. Jute insulation is available and helps reduce road noise and heat.
Description: Trunk Lock 1973-1974 Plymouth Barracuda Includes two keys.
Item #: DMPS-10015
Condition: New
Price: $49.99
Mopar Trunk Mats 1970-1974 E-body Cuda ChallengerNew
€¢ OE quality €¢ Manufactured in correct patterns €¢ Printed on heavy rubber and are die-cut, these are not the cheap vinyl reproductions everyone else sells!
Available in Houndstooth...
Description: €¢ OE quality €¢ Manufactured in correct patterns €¢ Printed on heavy rubber and are die-cut, these are not the cheap vinyl reproductions everyone else sells!
Available in...More Details »
Item #: DMPS-7089
Condition: New
DOES NOT QUALIFY FOR FREE FREIGHT
Price: $74.99
Mopar Trunk Slider A-body B-body C-body E-bodyNew
These are the sliders that go onto the trunk torsion bar. Sold as a pair.
Description: These are the sliders that go onto the trunk torsion bar. Sold as a pair.
Item #: DMPS-7239
Condition: New
Price: $19.99
Mopar Turn Signal Switch 1970-1977 Cars & 1973-1983 TrucksNew
Replace your worn out turn signal switch with our brand new reproduction.
Fits all 1970-1977 cars WITHOUT cornering lamps and 1973-1983 Dodge Trucks WITHOUT tilt wheel.
Description: Replace your worn out turn signal switch with our brand new reproduction.
Fits all 1970-1977 cars WITHOUT cornering lamps and 1973-1983 Dodge Trucks WITHOUT tilt wheel.
Item #: DMPS-3454
Condition: New
Price: $79.99
Mopar Under Dash InsulationNew
Mopar Under Dash Insulation. Our under dash insulation is die cut for a perfect fit.
Description: Mopar Under Dash Insulation. Our under dash insulation is die cut for a perfect fit.
Item #: DMPS-3131
Condition: New
Price: $24.99
Mopar Underhood Wire Strap Kits- 1970 E-bodyNew
Tidy up all of the loose wires under your hood with an OE wire strap kit.Includes all of the original type straps which have the correct fit and finishFits:1970 Dodge Challenger1970 Plymouth Barrac...
Description: Tidy up all of the loose wires under your hood with an OE wire strap kit.Includes all of the original type straps which have the correct fit and finishFits:1970 Dodge Challenger1970 Plymouth...More Details »
Tidy up all of the loose wires under your hood with an OE wire strap kit.Includes all of the original type straps which have the correct fit and finish.
Fits:1971,1972,1973,1974 Dodge Challenger...
Description: Tidy up all of the loose wires under your hood with an OE wire strap kit.Includes all of the original type straps which have the correct fit and finish.
Fits:1971,1972,1973,1974 Dodge...More Details »
Vapor Separator for all 1968-1971 B/E body 440 & Hemi cars The vapor separator mounts near the fuel pump and is designed to filter the fuel while also routing fuel vapor back to the fuel tank ...
Description: Vapor Separator for all 1968-1971 B/E body 440 & Hemi cars The vapor separator mounts near the fuel pump and is designed to filter the fuel while also routing fuel vapor back to the fuel tank to prevent vapor lock.
Item #: DMPS-4364-V3
Condition: New
Price: $49.99
Mopar Vinyl Custom Vintage Floor Mats 1966-1976 A/B/E Body PentastarNew
Mopar Custom Vintage Vinyl Floor Mats These custom vintage rubber style floor mats have a custom-fit floor pan shape, are easily cleanable and have a patented "Sure-Grip" anti-skid backing. Our m...
Item #: LAIS-10086-FMCDP00Legendary Auto Interiors
Description: Mopar Custom Vintage Vinyl Floor Mats These custom vintage rubber style floor mats have a custom-fit floor pan shape, are easily cleanable and have a patented "Sure-Grip" anti-skid backing. Our...More Details »
Mopar Custom Vintage Vinyl Floor Mats These custom vintage rubber style floor mats have a custom-fit floorpan shape, are easily cleanable and have a patented "Sure-Grip" anti-skid backing. Our ma...
Description: Mopar Custom Vintage Vinyl Floor Mats These custom vintage rubber style floor mats have a custom-fit floorpan shape, are easily cleanable and have a patented "Sure-Grip" anti-skid backing. Our...More Details »
Mopar Custom Vintage Vinyl Floor Mats These custom vintage rubber style floor mats have a custom-fit floorpan shape, are easily cleanable and have a patented "Sure-Grip" anti-skid backing. Our ma...
Description: Mopar Custom Vintage Vinyl Floor Mats These custom vintage rubber style floor mats have a custom-fit floorpan shape, are easily cleanable and have a patented "Sure-Grip" anti-skid backing. Our...More Details »
Item #: LAIS-6947-FMCU000
Condition: New
Not Available
Custom made to order, 8-9 weeks to ship
Price: $249.99
Mopar Vinyl Top Moldings-1970-1974 Plymouth BarracudaNew
Originals are often missing or damaged and hard to find in good shape. Set of 2 pieces that separate the vinyl top from the painted body panels. Clips not included.
Description: Originals are often missing or damaged and hard to find in good shape. Set of 2 pieces that separate the vinyl top from the painted body panels. Clips not included.
Correct boar grain vinyl top available in black,white, antique green and dark green Each top is fitted and are manufactured to original specifications with the correct 100% cotton drill backing. ...
Description: Correct boar grain vinyl top available in black,white, antique green and dark green Each top is fitted and are manufactured to original specifications with the correct 100% cotton drill backing....More Details »
Item #: DMPS-6261
Condition: New
Price: $399.99
Mopar Weatherstrip Kits- 1970-1974 E-bodyNew
Our kits provide you will all the correct pieces in one package saving you time and money!Kits are discount exempt.
Kit A -Includes the door seals, roof rail seals, trunk seal and cat whiskers...
Description: Our kits provide you will all the correct pieces in one package saving you time and money!Kits are discount exempt.
Kit A -Includes the door seals, roof rail seals, trunk seal and cat...More Details »
1970-1974 E-body windshield molding set. Replace your damaged or missing moldings, these are made of stainless steel like OE and fit the factory style clips for ease of installation. Kit does not c...
Description: 1970-1974 E-body windshield molding set. Replace your damaged or missing moldings, these are made of stainless steel like OE and fit the factory style clips for ease of installation. Kit does not...More Details »
Item #: DMPS-3430
Condition: New
Oversize Handling Fee $9.99
Price: $329.99
Mopar Windshield Reveal Molding Clips-1970 E-body Cuda ChallengerNew
Reveal clips are used to secure the stainless moldings around your windshield. Screws included Fits: 1970 Dodge Challenger 1970 Plymouth Barracuda, Cuda
Description: Reveal clips are used to secure the stainless moldings around your windshield. Screws included Fits: 1970 Dodge Challenger 1970 Plymouth Barracuda, Cuda More Details »
Item #: DMPS-10960
Condition: New
Price: $19.99
Mopar Windshield Reveal Molding Clips-1971-1974 E-body Cuda ChallengerNew
Reveal clips are used to secure the stainless moldings around your windshield. These clips slip over the studs that are welded to the windshield frame Fits: 1971,1972,1973,1974 Dodge Challenger ...
Description: Reveal clips are used to secure the stainless moldings around your windshield. These clips slip over the studs that are welded to the windshield frame Fits: 1971,1972,1973,1974 Dodge Challenger...More Details »
Item #: DMPS-10957-43A
Condition: New
Price: $24.99
Mopar Windshield Washer Bottle - 1970 E-body Cuda Challenger (for use with Manual Foot Pump)New
Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the manual foot pump (not incl...
Description: Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the manual foot pump (not...More Details »
Item #: DMPS-7131-G76C
Condition: New
Price: $64.99
Mopar Windshield Washer Bottle - 1970 E-body Plymouth Barracuda Cuda Dodge Challenger ( accepts Electric Pump)New
Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the electric pump (not include...
Description: Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the electric pump (not...More Details »
Item #: DMPS-7122-G36C
Condition: New
Price: $64.99
Mopar Windshield Washer Bottle - 1971 E-body & 1971 B-body Cuda Challenger (for use with Electric Pump)New
Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the electric pump (not include...
Description: Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the electric pump (not...More Details »
Item #: DMPS-7125-G53C
Condition: New
Price: $64.99
Mopar Windshield Washer Bottle - 1971 E-body & 1971 B-body Cuda Challenger with Manual PumpNew
Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the manual foot pump (not incl...
Description: Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the manual foot pump (not...More Details »
Item #: DMPS-7128-074MC
Condition: New
Price: $64.99
Mopar Windshield Washer Bottle - 1972-1974 E-body Cuda Challenger, 1972 B-body (for use with Electric Pump)New
Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the electric pump (not include...
Description: Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the electric pump (not...More Details »
Item #: DMPS-7132-590
Condition: New
Price: $64.99
Mopar Windshield Washer Bottle - 1972-1974 E-body Cuda Challenger,1972 B-body (for use with Manual Foot Pump)New
Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the manual foot pump (not incl...
Description: Correct washer bottle features the original Mopar part number and stamping as well as the correct cap. Includes mounting screws and washer pump gasket. For use with the manual foot pump (not...More Details »
Item #: DMPS-7136-590M
Condition: New
Price: $74.99
Mopar Windshield Washer Bottle Hose Kits for Electric Pump- 1970-74 E-body & 1971-72 B-bodyNew
Our complete kit includes the electric washer pump with gasket and filter, the "T" hose connector, correct ribbed hoses, washer bottle screws and squirter nozzles.
Description: Our complete kit includes the electric washer pump with gasket and filter, the "T" hose connector, correct ribbed hoses, washer bottle screws and squirter nozzles.
Item #: DMPS-7194-WH9C
Condition: New
Price: $94.99
Mopar Windshield Washer Squirters- 1970 Cuda AAR & Challenger T/ANew
Replace your missing or broken windshield washer squirters with these OE correct part for your 1970 Cuda AAR & Challenger T/A
New reproduction 3 switch Rallye dash bezel kit for 1970-71 E-body models. Made on an aluminum back-plate with corner tabs to fixate onto the gauge housings. Requires using the original steel back-...
Description: New reproduction 3 switch Rallye dash bezel kit for 1970-71 E-body models. Made on an aluminum back-plate with corner tabs to fixate onto the gauge housings. Requires using the original steel...More Details »
New reproduction 3 switch Rallye dash bezel kit for 1972-74 E-body models. Made on an aluminum back-plate with corner tabs to fixate onto the gauge housings. Requires using the original steel back-...
Description: New reproduction 3 switch Rallye dash bezel kit for 1972-74 E-body models. Made on an aluminum back-plate with corner tabs to fixate onto the gauge housings. Requires using the original steel...More Details »
Item #: DMPS-3246
Condition: New
Price: $229.99
Mopar Woodgrain Decal Center Console E-Body & 71-74 B-bodyNew
Mopar Woodgrain Center Console Decal Replacement decal for the center console Fits: 1970,1971,1972,1973,1974 Dodge Challenger 1970,1971,1972,1973,1974 Plymouth Barracuda
Description: Mopar Woodgrain Center Console Decal Replacement decal for the center console Fits: 1970,1971,1972,1973,1974 Dodge Challenger 1970,1971,1972,1973,1974 Plymouth Barracuda More Details »